TelePresence and Video Infrastructure

Hi all! I'm in the process of collecting information from all my network devices, such as SystemName, SerialNumber, SoftwareVersion, and SystemType. I have done this using SNMP, but when I get to the SX family, I've hit a roadblock. Typically, I wou...

Hi all     I have an cisco 2911 router which has one VWIC3-2MFT-T1/E1 card for E1 signal conversion and 2 VIC2-2FXS card for voice calls. The ios version in the router is c2900-universalk9-mz.SPA.151-1.T.bin.  The problem is the ios doesn't have a ...

Helllo, We are facing problem with presentation sharing with SX80. Some time it works some times it is not. We are using HDMI to HDMI cable for content sharing. We are using HDMI port 3 for connecting laptop/PC. Changed resolution but same problem o...

I am looking at upgrading an old TANDBERG system.  the SX80 looks like the logical choice, however the SX20 is much cheaper ? What are the capability differences between them?

My cable company tells me that I should be able to copy video/audio recordings from the Cisco 8652 DVR (provided by the cable company) to an external hard drive.  Does anyone know how I can go about doing this?  The Cisco 8652 DVR does have a USB con...

I hope.Is there any way to remove the placed calls, missed calls, recieved calls and my contacts from VC system phone book displays.In trying to deploy a global phone book using TMS and making it as simple as possible some people have questioned why ...

On the sx20 camera extension using 2 of the CAB-PHD4XS2-SPLI is the cat 5 a true cross over cable (wo, o, wg, b, wb, g, wb, b to wg, g, wo, b, wb, o, wb, b) or is it ONLY pin 3 and 6 flipped?

system is frozen at a phonebook entry showing "transferring data...." although after powering the system off and on  again - any suggestion to resolve this problem?

Dear All, Whenever I am sharing content during VC while using MCU 5320 then (Selfview + Content) both seen in only 1 pane and content is not coming in Content channel .IS there any requirement to achieve this.? if i am making content full screen then...

Can a C40 (or any other Cisco Telepresence device for that matter) use any camera other than a Cisco Telepresence Precision camera? I've got a Sony studio camera I'd like to plug directly into the C40. In the past I've used scalers/switchers and othe...

hi, for customers with version X.C4.0 and above do we need to downgrade to X.c 3.0.3 or the 4.0 and above are committed to the resolve of the leap second issue