Unified Communications Infrastructure

is there any option to forward incoming call from hunt pilot to phone memeber in the hunt group

Dear All,I created hunt pilot 2222 to hunt groupwhen a group member forwards all calls to his mobile and someone calls the hunt pilot , the call is not forwarding to his mobile.is there any option to achieve this scenario .

Resolved! Group pickup to one extension only, but not each other

My client has a Bogen pager connected to an FXS port with the nighbell extensoin configured on it. When you dial the extension it rings the overhead paging and someone has to pickup that call using group pickup. The only way I can see this working is...

CUCM 11.5 route pattern weirdness, outside calls riniging internal extensions

Hello Community i have a strange issue, I have a route pattern on a CUCM11.5 that works just find for 98* of all call internal and external. I have a few specific numbers that if the last 4 digits of the outside number match an internal DID the, e...

Resolved! How can I implement this?

Hello, I need to configure my BE6000 for the following needs: - External users call a specific internal number (e.g. 001345666). Is just one, can I use the hunt pulit the same? - If 5666 is busy (on conversation), external users must hear a recordi...

Need help in uploading greetings to Unity connection

Hi We need help to uploading greetings in Unity Connection. As everyone i m getting the same Java error message. Looking for alternate way of uploading the greeting like CLI mode. Unty connection - 10.5.2.12901-1 Regards Mohamed

Resolved! IM and Presence Service between Different Domains/ CUCM and Presense Clusters

Hello Community, I am in the process of interconnecting 2 individual clusters of CUCM/IP and Presence of 2 companies with domains company.uk and company.us. Both CUCM communicate in terms of telephony via Inter-Cluster Trunk (Non-Gatekeeper Control...

Software updates

I'm going to rant a bit. Everytime I go to download an update for my Cisco UC environment it never fails that I run into an issue with being able to download or license my application. "Additional Entitlement Required" is usually the message I receiv...

Installation of IM&P consistently fails Network Connectivity Validation test 1of2 98%

Hey Everyone, Looking for some help Setting up our new phone system and have got the CUCM up and running trying to get the IM&P up and running and everytime it runs the validation it sticks at step 1 of 2 and 98% will sit there for 5 mins and then ...

mixing SIP and SCCP in CUCM line group

I had a hunt pilot/hunt list/line group setup that had a mixture of SIP and SCCP phones as members of a line group. Everything -seemed- OK until one day all the SCCP phones went offline (due to environmental reasons at their location). During the tim...

Upgrade CUCM and CUC from Bootable ISO

Hi, A quick question I hope. Can CUCM and Unity Connection be upgraded by using the bootable ISO? The reason for asking is that it's a remote site with very slow comms, so a pain to get a large file uploaded. They'll need the bootable media in ca...

Dial Peer Status is anoying. How can i deactivate this messages?

Hi All, since i have enabled options ping on my dial peer's i got every this messages from every dial peer every minute: Sep 5 14:41:04.428: %SIP-5-DIALPEER_STATUS: VoIP dial-Peer <200> is UpSep 5 14:41:27.404: %SIP-5-DIALPEER_STATUS: VoIP dial...

On Prem CUCM and hosted "Skype for Business" integration

One deployment has on-prem CUCM infra (ver 10.5.2) with expressway setup for B2B call. Other deployment (completely independent) has hosted skype for business (office 365). Requirement is to enable calling between phones in CUCM and Skype for Busines...

DX80 pop-up notification query

Hello! Does anybody knows what does the yellow notification at the bottom, prompting an end users label name an a timer means on the DX80 screen? When I select it, it just prompt me a dial screen. Best regards,

Configuring CUCM for Redsky

CUCM routing for Redsky I don't understand how CUCM will route the call to sip trunk Question what number should I use for the route pattern?

CIsco IP PHone 8841 line 2 display issue

Hello all, I have below setup and recently upgrade from version 9.1.2 to 10.5.2 and it showing some issues:CUCM 10.5..2 -----1 pub and 2 sub on 8841 ip phone, i configure second line as extension mobility button. but on ip phone it is not displaying...

Unified Communications Infrastructure

Forum Posts

is there any option to forward incoming call from hunt pilot to phone memeber in the hunt group

Resolved! Group pickup to one extension only, but not each other

CUCM 11.5 route pattern weirdness, outside calls riniging internal extensions

Resolved! How can I implement this?

Need help in uploading greetings to Unity connection

Resolved! IM and Presence Service between Different Domains/ CUCM and Presense Clusters

Software updates

Installation of IM&P consistently fails Network Connectivity Validation test 1of2 98%

mixing SIP and SCCP in CUCM line group

Upgrade CUCM and CUC from Bootable ISO

Dial Peer Status is anoying. How can i deactivate this messages?

On Prem CUCM and hosted "Skype for Business" integration

DX80 pop-up notification query

Configuring CUCM for Redsky

CIsco IP PHone 8841 line 2 display issue

Hearty congratulations to the December Spotlight Award winners!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

jabber - delete message from external sql

listChange output

"Service Manager is currently busy" After Restarting Cisco XCP Router

Secure SIP integration between CUCM and IM&P...

Monitoring/alerting for issues with Unified Messaging and Speechview

IM&P VM Resizing ways

Is CUCM 12.5 SU6 Comatible with expressway X12.5

CUCM 12.5 ESXI Support

CSR8000v Demo CUBE

Failing to clear primary and IPCC extension using Python