Resolved! how jabber only chat use ?
Hi everybody,i want to set cisco jabber for all of users in my company,to be only in IM Chat mode only? (disable use of telephony feature)how can i do this ?
Forum Posts
Hi everyonei am trying to figure out if any specific smart licensing configuration is required for media-proxy configuration on IOS XE 17.9So far it seems to work nicely and i dont have any “mode border-element” configured under the voice service voi...
Our Security team has detected vulnerabilities SSH Server Supports weak key exchange AlgorithmTLS Server running on version 1.1 Router running on IOS-XE Version 17.03.05 Release Software (fc2) How to resolve this
Resolved! Analog Trunk between TWO PABX System
Hi, We have a strange requirement from our customer to connect two PABX systems over an analog trunk.Currently, analog phone is connected to PABX A over 1 pair cable. Our customer wanted to connect PABX B in place of the Analog phone to have a one-li...
Hello everyone, I'm trying to configure a personalized message for holidays and days off for a specific standard extension 1001. After attempting to configure this, all calls are connected to the personalized message after the 20-second ring, regardl...
Hello, I would like to manage the checkbox "Locked by administrator" with AXL.Is it possible?
We are using Imagicle for call records. When a call rings a shared line directly, imagicle shows the Device Name (MAC) in the report.When callers reach the shared line thru UCCX menu, the MAC does not show in the Device Name column.We are trying to d...
Hello everyone, I would like to do what explained in the title of this post and more in details in this guide below: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cube_sip/configuration/xe-3s/cube-sip-xe-3s-book/m_voi-report-end-cal.html#re...
There are two phones which of the type is cisco 7821 and the cucm version is 10.5. When Phone named A called the Phone named B, the phone A can not hear the B's audio, the phone B hear the A's audio. I sniffer the packet of the two phones and...
Hi All, I have been through all the discussions on this community wrt to the migration with Data Export/Import. I have a unique situation we have to upgrade to new hardware as well as move to brand new data centres. My question is and maybe I have a...
I have InformaCast (v.9.0.1) and cucm v.10 running on my environment but when I make a broadcast to an active phone , the broadcast is sent to the headset. Is there a way or hack to have all InformaCast audio broadcasts' played only on the speaker...
I have a client who has a CUCM server running version 10.5. The publisher and subscribing have suddenly stopped synchronizing for some reason. According to the customer, this seemed to have happened soon after migrating the CUCM instance from the Cis...
Hello, I have CUCM 14SU3 and IM & P 14SU3. The cluster has three voice/video servers and two IMP servers. Site A has the CUCM Pub, a CUCM Sub and IMP Pub. Site B has a CUCM Sub and the IMP Sub. Most users use Jabber for Windows rather than IP phones...
Resolved! CUCM Upgrade from 10.5 to 14
My client wants to upgrade their CUCM 10.5 to version 14 or even 15. However they have a UCS M3 and M4 server existing, which are both end-of-life. Problem is the M3 server cannot or may not support VMware ESXi 7.0 which is the minimum ESXi version f...
Question to the community out there. (Anyone done this or came across this before?) Running the preUpgrade cop file on my CUCM PUB still on 11.5 I get the following failure. Question: It seems this is only if you go to version 15, a version 14SU3 sho...
