Hello Bros' I have UCS system with Fabric interconnect 6248UP - Chassis 5108AC2.IFTA-FI - UCS Manager 3.1(3a). I have tried to send all system logs to a remote syslog server but still not receiving any. how syslog for the UCS works "UDP ...
Forum Posts
When deploying new templates through Powershell I want to clone an existing BIOS policy and attach it to the new template. Unfortunately there is no clone or copy cmdlet. When I use the GUI logger to convert the api commands used to clone a BIOS temp...
I have a C220 M4 that I attempted to boot from an ISCSI target from the embedded Ethernet ports.I can add the IQN with no issue.When a try to “Add an Attempt, I receive the following message. I checked the Network Stack – it is enabled, but I’m not s...
Hi Team,I'm using InterSight to install 2 new UCSx-210-M7Attaching here the Boot orderI've mounted CD of ESXi, and I can't view it in the boot menu (see screenshot) We already have 2 UCS-X-210-M7 that we've installed 3 months ago, and I do remember i...
I have apic on UCS C220 M5 Rack Servers. I update CIMC and other components using HUU to version 4.2.2a. After update CIMC GUI is not responding. I can ssh to CIMC ip address and the apic is seen in aci fabric as Fully fit. I have rebooted cimc, disa...
I have a UCS C220M5 (Stealthwatch SMC 2210), this server are tear down of production, and i need reutilize this server to install a VMware ESXi to virtualices some small VM. When i try install VMware ESXi on this UCS, the BIOS send the follow message...
Hello,We noticed we have an issue with faulty fans on a Cisco Integrated Management Controller. After reviewing the logs, I need some clarification on what fans are failing.2024-09-06T11:01:20 CriticalF0397sys/rack-unit-1/fan-module-1-5/fan-2performa...
hi,need some help, I have a c220-m4 server, was running fine until late yesterday, when I decided to upgrade the CPUs on it from e5v3 to e5v4Now, the server when powered on spins the fans to MAX, the front LEDs are disabled, no green or amber..nothin...
Hi, i have a chassis that has 2 PSU's that are faulty, we have 7 blades but only 2 in use.Power supply is Grid. PSU3 and 4 keep coming up with the voltage-problem and then power-problem. the power problem happens every minute alternatively (psu3 powe...
Hello. I am using C220 M5 and the following log occurred and it restarted. 'BMC_WATCHDOG: Watchdog sensor, Hard reset, Hard reset' I am using version 4.1(3C).Has anyone experienced the same case or taken action?
I have a UCS C200 M2 server at my house. It runs CENTOS7 presently but migrating to Rocky 9 soon. I have an systems alert flashing and I get the 18 beeps. However, I cannot get in to CIMC via the IP because it seems to either be the wrong one or j...
Hello, After spending days trying to get my C240 M4 to upgrade to the latest BIOS from 4.0.2d, was able to get the Host Utility Upgrade to boot using UCS-C240-m4-huu.4.0.2r.iso. It seems to have updated the CIMC with no issue, but after attempting th...
They stopped working all of a sudden. The only thing is firmware on QNAP could auto-update. So probably a new SSH RSA key was generated. I deleted the backup device, and now I can not set it up from scratch. It says invalid user - login which is not ...
Hi, We have a setup with a pair of fabric interconnects and few UCS 5108 chassisCan I add UCSX 9508 chassis to the same set of fabric interconnect? (after changing it to intersight manage mode)
Hi We had an alarm on an HDD. The alarm says: "Predicted Failure - Moderate Fault " so we did the RMA and replace that HDD for a new one. Nevertheless, the alarm still appears. Here is the image of the alarm, note that the state says online, the fa...
