Voice Systems and Accessories - Small Business

I need help in a step by step way on these following concerns regarding the IP phone Cisco 3031. How to change the language to spanish?2. How to remove the Do NOt Disturb option.3. How to configure groups for grPick and/or PickUp?4. Also the softkeys...

I have been seriously contemplating this question, because of the lack of features that the BE3000 offers.  It offers simplicity in terms of end user management - yes, but its taken away all the functionality of a traditional PABX system which *most*...

Hi I have a UC560 and the client is looking to add 10 additional phones and also wants to integrate paging into their current Crestron system.They require a 12V signal and of course the audio.Currently the phones are set to page via Paging Groups, ca...

I installed 4 SPA112 units this week for fax machines at a client location.  Three worked perfectly, one fails while executing the fax handshake.I updated the firmware to 1.3.1 (003), that did not help.The failing unit is attached to a Fax Server, wh...

First, This is a new installation. All the SPA504G are working ok, I only have some problems with CIPC.All IP Phones are registering ok, and the voice quality is perfect.Sometimes my CIPC freezes when I try to make a call, do not respond the dialing ...

I am trying to capture the extension from the CDR of CISCO UC560. I  understand that one call will have more than one CDR assosiated with it. The extension is captured by combining all the assosiated CDRs.The  problem is that the set of CDRs contain ...

Hi Is there a way that we can change the date format to dd/mm/yyyy instead of mm/dd/yyyy in BE3000 ? Everytime when I change  the date format in system setting -> Date/time  to Australia date format , click Save.  I thought my change take effect but ...

I've got a Cisco SPA303 phone that is stuck at "Initializing Network".  How do I factory reset it?  I can't seem to get into any configuration menus or settings.  The manual says to press **** and choose 4 and hit # but nothing happens.  Is there som...

We're running a UC540 at a customer, who's got 4 lines for incoming/outgoing calls. Out of their 6 employees, only 2 should pick up calls and hand them over to the others.Now my question:Is it possible to configure the UC to send out a busy tone to t...

Has anyone successfully been able to configure complete functionality of these on the UC560?  Making IOS Jabber work, breaks sip trunk configuration and the MWI.  I do currently have a case opened with TAC, but they have yet to find the solution.  Cu...

Hi all,Is possible to establish a PIN or something similar to secure the access to a meet me conference?Regards.                  

Hi All,    Cisco BE 6000 9.X support both Cisco Prime Unified Provisioning Manager 9.0 BE and Prime Collaboration 9.0 Provisioning as its management tool. OVA for both applications are pre-loaded on server from factory starting end of March 2013.    ...

Hi, I we are looking to upgrade a UC520 from 4.1 to 8.X and add some capabilities. Please help with the questions below. 1. Are you aware of any issues with upgrading from UC520 4.1 to 8.X? Does this need to be multi phase? 2. Is the 7942G SSL VPN ca...