I've run across an interesting issue. SPA 122 running Beta FW 1.2.0. If you attempt to make a call immediately after the line light comes on - unit registers to server - the box locks up. You cannot browse to it, and the line gets stuck with dial ton...
We had a customer yesterday who stopped recevinging incoming calls.The issue was fixed by a reboot, and unfortunately I did not keep a copy of the logs.However, what seemed to be happening is that incoming SIP INVITE's were getting a "182 Queued" mes...
I am currently in the process of configuring a new uc320 + Mediatrix 4402, I am able to dial to the system and it goes through to the correct hunt group etc... But when I try to make an outbound call I am receiving "Internal Server Error" on the hand...
Just a quick note to let you know that the BE3K Version 8.6.2 can be upgraded with a regular LG DVD player/burner. I was told in training that I needed an DVD with extenal power as the BE3K does not prvide power ofer USB. This is incorrect...
I have a customer that shares external lines between several phones. On some of the phones, the customer doesn't want to hear the ring but would like to answer the line. Is there a way to turn off the ring tone on a shared line?Ryan
Hi all,i got the uc520 FXO ports configured for 4 lines. there is a need to configure and activate 2 more ports.How do i go about it?Thanks
Hi,Is anyone else have real trouble configuring their Cisco SPA 112 and 122 devices through the web interface, after enabling https (and disabling http)? - Select https only under Web Access Management -> Web Utility Access - Log out of the device a...
I accidentally turned on the VLAN on SPA 8000 and now I cannot connect the box and all extensions on the box are dead. How do I turn off the VLAN?
I have a uc540, I want to assign static ip to devices, which is the procedure? Thank you. computers go through an access point.
HI, I am trying to implement intersite connection with two uc560.I am using dyndns for establishing the connection . Here the problem which I am facing is ,in first site-(Site A) before UC560 the internect connection is shared with sonicwall TZ200 an...
I have setp on UC500 that when someone call in to an extension it forward to their cell. On the CUE:-Users- Number E.164 Registration: both reg-- Second number: ((dial out number(9)+ cell #) example: 91800XXXX) Am I right?That's how far I got. Where ...
I noticed that Unity Express 8.6 (which comes with the latest SWP) support web inbox -- that is, accessing your voicemail messages through the web interface. This does not appear to be possible on the UC500 at first glance. Was this feature deliberat...
I have a customer with a UC540 system configured with a hunt group for 4 of the users. The hunt group is sequential and the timeout is set at 25 seconds. Approximately once a week the customer calls me to have me reset the timeout back to 25 seconds ...
I am trying to enable the SSL VPN - full tunnel feature in UC520.However when I try to load the .pkg file into the UC520, I've met with the error "Error in installing package file". (refer screenshot).How do I solve this issue or get the detailed inf...
We are running the UC320W and we have one SPA508G connected to it. When we try to access the phone via the web all works ok until we try to access the "Admin Login." We then get "403 Forbidden!."There is no option on the phone to allow admin web acce...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: