Voice Systems and Accessories - Small Business

Hello,I'm trying to assign speed dial buttons on my SPA525g but cannot get them to actually appear on the phone. Here is my config:ephone  15 device-security-mode none video mac-address 68EF.BDCC.9E04 ephone-template 16 max-calls-per-button 2 usernam...

i can problem with list.xml, it load the imagen in the phone 7975, attach configuration and log  problem, please your help.tftp-server flash:/Desktops/320x212x12/List.xmltftp-server flash:/Desktops/320x212x16/List.xmltftp-server flash:/Desktops/320x2...

Giving the fact that latest firmware release (2.00.20 and 2.00.21) of wrp400 supports the t38 speed of 2400bpps and 4800bpps (previously unsupported on all the former linksys voip product family) I would like to know when this feature could be added ...

I have a client with a UC560.  All calls go to the initial auto attendent and then the caller gets to where they need to go by using the menu.  Some of these calls get put into blast groups that ring 2-4 phones.  I am using VeraSmart to do call loggi...

Hello,I have a UC540 depoyment along with SPA 508 phones and the local directory on the phones just displays extension numbers and not the Names.  The names are empty.  Please help.Regards,Jibu Mathews

After i press "factory reset" on the phone, the phone never came back online after that. It always shows Cisco logo on the screen. Do we have a way to reset it again?fyi: This phone has 7.4.6 firmware before resetting.

A couple of customers complained about the few seconds of silence you get when transferring to the dial-by-name menu.  Is there any way to eliminate this gap?

I have a client who has ordered a UC560 and 20 x 6921 IP PhonesI am finding conflicting information on the cisco website as to whether these phones are supported or not.The required commands seem to be supported on the UC560, but no phone firmware is...

Hi,I have a Cisco UC560 (it is configured vía CLI) that is working fine.Now I want to implement Skype for SIP vía CLI but I have some problems.I get that the user is registered but  when I do a "debug ccsip messages" I see that all DN which are confi...

Hi I am testing  Firmware 7.4.6 for SPA303 & SPA502G and I found a problem if I enable "SIP->STUN Server" & "EXT->NAT Mapping Enable".  The phone does not work properly when an incoming call is received.Example: 1002 calls 1001, 1001 automatically ca...

Does anyone know where I can get extra/spare/replacement handsets for the Cisco SPA5xx series?Thanks.10-15-10: Does anyone from Cisco have an answer? I am able to purchase 79xx series handsets online.. There has to be a way to purchase additional rep...

Hi,5 SPA504g(SIP protocol in CME)Call pickup group and Call pick up does not work.If you try to do a call pickup or call pickup group the phone displays "gathering call info" and nothing happens.Any quick setting that must be on or off somewhere for ...

Hi;Iwanto to know how much inline power is required for SPA502, in the datasheet is 802.3af-compliant PoE, but this is just the standard that can provides up to 15.4 W. Can anyone help me please? And for the other in same series?http://www.cisco.com/...

Hi everyone,I am at the end of my rope here. I have used this Sipura SPA1001 for about 3 years without problems using 12voip and other voip providers. Recently I have replaced the O2 wireless router because it kept resetting itself at random times an...