Voice Systems and Accessories - Small Business

Is it possible to display a name instead of a number for incoming caller-id's?for example, all users with mobile phones used in the company will display when the call to the UC500We use the simple 521 phones

Hi Guys,I am about to lose it with my UC520 and actually throw it out... In my experience as the Infrastructure Manager for a major investment bank I have never been foiled by any piece of IT kit until now....I received a replacement UC520 as my old ...

Hi,is it possible to create a softkey to tranfer a call to a particular extension ?thankshasratraj

I would like to setup Autoattendant so after greeting timeout, the call will forward to operatorI currently use lastest firmware 7.1 ea and CCA 2.0Thank you

Hi,I'm working with a uc500.I'm trying to implement a trunk sip to a gsm gateway. I made the test with the gsm gateway and a sip client on my pc without problem.When I redirect the call to the uc500 I can't do any call towards a mobile phone. I test ...

Hi,how can i change language on UC 540?Regards

My company is looking at purchasing the UC540 system for our offices- is this the best option for 15 users, with the possiblility of 1 or 2 remote users, ability to use mobility and presence and room to grow with other features in the future? Also, c...

I'm wanting to block specific incoming calls on a uc520/540.  Has anybody had any experience with this?  can't find any documentation around it

Hi,our customer has a spa942 with 2 different sip-accounts. On  each ext. (sip-account) he wants a different ringtone.We created on ext1 and ext4 different SIP-accounts. In spite of we configured ringtone 1 for ext1 en ringtone 10 for ext4, the ringt...

Hello,If OOB configuration through CLI, is not supported for the new UC500 models. Does this mean that there is no support for FAX integration with CUE?What are the options or Sample configuration guides to receiving Faxes without Fax Machines?Best r...

Does anybody have some pointers regarding where to find information about customizing the screen of the SPA525 in combination with a UC500?We'd like to show in the screensave a downloaded image with traffic information (changes every couple of minute...

Hi,promptmgmt for CME is not working, when the AVT number is dialed, it gives fast busy right away.Please see the config from CME & CUE:!dial-peer voice 400 voip description CUE prompt management destination-pattern 102 b2bua session protocol sipv2 s...

If I go to the webpage of my SPA525 phone: http://10.1.1.10/I can see under Voice -> Phone that all audio input gains are set to 0.How do I change these? Other parties have serious difficulty hearing me, I have so shout into my phone.