Voice Systems and Accessories - Small Business

We have a problem using a spa122 (or any cisco device) communicating with some IVRs over certain carriers.  The carrier wants us to change the Marker Bits on the DTMF packets.  Right now the first DTMF packet (for each keypres) has the marker bit set...

Hi,Can I use spa500s buttons to put some numbers before dial?For exemple, I want to use one route in my asterisk server, but I don't want to digit some numbers to identify the route, I want that the numbers which do that are placed before I start dia...

Hi All,I want to integrate my BE6K with CUCME,my scenario below :-     HQ             =     BE6K (Medium Density)-     Branch1      =     CUCME (2911)-     Branch2      =     CUCME (2911)-     Branch3      =     CUCME (2911)-     Branch4      =     C...

I have the following situation.My provider gives me  PSTN connection  though linksys SPA 2102.They  connect SPA 2102 from imy side to their side by sip trunk.In my side i have router with FXO ports.Now i`m trying to connect my  router`s FXO port to S...

I have a UC520 phone system and our auto attendant has been configured to allow for the Dial by Name directory. Currently when someone searches the directory for an individual in the directory, the auto-attendant states the name of the indivirual the...

I can receive calls from VoIP phones, but not from landlines and cell phones.  My SIP provider asked me to change the ptime of SDP sent by the UC320 from 30ms to 20ms.  Clearly there is no place to do this, but I did find a PMF for MeTel that does th...

Hi there!I want that none of the user to use DND?Can i do this from WEB-ADMINISTRATION page of IP PHone?let me know?Regards!

We had Vodafone Onenet SPA525G2 phones which have been flashed by Vodafone and we installed the most up to date firmware on them.When trying to access the webserver, the admin panel asks for for login details.We have tried every possible combonation ...

My 3102 has an "off hook" time of about 9 seconds before it times out if no key is pressed.  This is usually OK, but my 2102 only gives me 3 seconds, which is definitely not enough.I found in the Linksys "ATA Administration Guide v3 200809" :-  ftp:/...

Hi!I'm having problems setting up Ps parameter in my dial plan on SPA3102. It simply doesn't work.For example, (P9|*xx|#xx|****|x.)does nothing and I have dial tone only for three seconds.Neither (P9|(*xx|#xx|****|x.) (as in example from manual) or (...

Please give an solution on my issue noted below..i have a Cisco ip phone 303 model, while i am upgrading firmware to my SPA 303, due to some power problems it went to Recovery mode. Then i have downloaded cisco SPA-50xg recovery tool and i have start...