Hello,each of my users has a specific user group that they are in. is there a way to track who is logged in? and what they are doing?Thanks
Hello,each of my users has a specific user group that they are in. is there a way to track who is logged in? and what they are doing?Thanks
When I start ASDM to the primary (active) ASA of a failover pair (192.168.1.10), there is a warning about the certificate not matching the hostname. The certificate points to the inside IP adress of the standby ASA (192.168.1.11). Below the waning:Ho...
Hi all, my access points cannot see the wlse device due to the firewall, I am running a site to site vpn tunnel between 2 sites, im getting the below error, can anyone help on this ? Connection attempt was prevented by "no forward" command: udp src o...
Hi all,Can somebody help me out how to configure site2site connection using l2tp+ipsec? Currently I have just IPsec tunnel but want use L2TP as transport to lower overhead. One more problem appears to be is bug in IOS which cause my two routers to st...
Hi,I've been searching for a sample configuration for this but can't seem to locate one. Anyone point me in the right direction or have a working example they can post ??Thanks,Stuart
Hi All,i wan to create site to site vpn between two offices.at my HO i have third part UTM.at branch office i have two ISP and using load balancer for traffic sharing as well redundancy. both ISP has given different public ip address.still i wan to c...
I connected VPN client, works for limited time, and my vpn down. The log of the VPN Client:Cisco Systems VPN Client Version 4.8.00.0440Copyright (C) 1998-2005 Cisco Systems, Inc. All Rights Reserved.Client Type(s): Windows, WinNTRunning on: 5.1.2600 ...
Hi,I have a Site to Site VPN over the Public Network (Internet) between two Pix Firewalls. I want to Know that we have a crypto access-list for whole network. E.g.,1) access-list vpn permit 192.168.28.0 255.255.255.0 10.10.16.0 255.255.255.02) access...
Hi everybody.I have router 3845 and nm 16 a/s this piece of my config. Lcp has timeout like this Timeout: State REQsent what here wrong I did aaa new-model ! ! aaa authentication login default group radius local none aaa authentication login console...
I'm trying to setup a VPN on my PIX 535. I created a local user and went thru the wizard to setup the VPN. I setup a tunnel group name and a preshared key. When I look at the log on the VPN Client, it says:Unable to establish Phase 1 SA with serve...
Hi need some advice on how to implement the following requirementsTo create a group users(policy) to specific URL that is authenticated to ACS 3.1 via radius. The ACS 3.1 synchronised with AD. the group user will be the AD group.Can i use LDAP authen...
Hello to all,my 3005 concentrator has many IKE proposals opted, but the 3002 client is not matching up on any. Here is a sample of the 3005 concentrator event log - 9375 09/26/2007 20:17:41.800 SEV=8 IKEDBG/79 RPT=52540 Proposal # 1, Transform # 17, ...
I am seeing a curious bug concerning maxlinks and currlinks.In my dialin router, I have several users defined locally. Each username is allowed to use ppp multilink, and I have also defined a maxlinks in the username command:<b>username xxxx user-ma...
Hi,I'm Unable to access vpn resources once i vpn successfully i can't ping the servers.I have attached my config for review.I need bit of assistance please.
Hi,I need help urgently.I have 2 cisco routers connected back to back in my lab for testing/troubleshooting.1 router is configured as L2TP client, the other router is configured as L2TP server.I used L2TP version 2.The client router is able to ping t...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
10-18-2024 07:55 AM | ||
10-17-2024 11:43 PM | ||
10-16-2024 04:00 PM | ||
10-16-2024 05:51 AM | ||
10-15-2024 08:07 AM |
User | Count |
---|---|
10 | |
2 | |
1 | |
1 | |
1 |