VPN

I am looking at designing a hub and spoke VPN solution. 30 sites to main data center. All sites have T-1's with 2620's. I am looking at 2 scenarios:1.) Two 7204VXR routers at data center with VPN Accelerator Module 2 configured in HSRP. Remote sites ...

Hi,do anyone knows a configuration document, which describe a Site-to-Site VPN between a Cisco Router and CheckPoint FireWall-NG. I have knowledge of the standard document, but I need a description with an ADSL Internet Access and Dynamic IP Adresses...

With PIX 6.3, what is the config to setup a client that is on a private network, and behind a PIX, to pass through this PIX and make a VPN connection on a remote PIX?

Hi,We are using PIX 515(version 6.3), and Cisco VPN Client 3.6.3. The system works beautifully over broadband connections. However, when we use diaup, we can connect but cannot ping anything inside the network; however, on about one in four dial up a...

--begin ciscomoderator note-- The following post has been edited to remove potentially confidential information. Please refrain from posting confidential information on the site to reduce security risks to your network. -- end ciscomoderator note -- ...

Hi Group!how can i transparent bridge ethernet over IPSec?!

I'm trying to setup a VPN connection from the net through the PIX to our private network. These are the steps i followed and commands executed on the PIX 515. 1. First of all - the version i am using : Cisco PIX Firewall Version 6.3(1) and Cisco PI...

Can the vpn client be used to log on to a novell server instead of a Windows domain?

I have set up vpn tunnel between public ip address of 3002 and pix public ip address. I get the tunnel up and working . But, i can not get virtual ip address from pix DHCP pool when i do ipconfig/all in my pc which is behind 3002. i can not ping the ...

If anyone has access to this file please let me know. I don't have console access to my concentrator at the moment and I want to have this file before I attempt to update.ThanksJeremy

Hi I saw in my testing that whenever a failover occurs on a PIX we have to restart our VPN sessions inorder to connect to the inside network...But last week i met a NETSCREEN specialist he said that this is not in the case of NETSCREEN & its VPN c...

Dear all, My customer decided to logged into the PIX via VPN client without providing the password for the environment that the PIX is integrated authorization by RADIUS (Windows IAS Server). From the manual, the SAVEUSERPASSWORD and USERPASSWORD se...

Im trying to setyup VPN. This is our setupInternet----Router(A)------PIX---(DMZ)----Router(B)-------Switch(LAN)--------Router(C)------Access-Point-------LaptopI have setup Router C as a VPN router so users using the internal wirelessnetwork can acce...