Wireless

Hallo Is it possible to use CISCO WLC / ISE for following. I've One SSID and 4 Use-Cases.  1. Guest Portal for selfsign in without approval for guests. short time up to 6h 2. Guest Portal for selfsigin with approval for "Longterm" guests 3. BYOD port...

I have a wireless network built on a WLC running 5520 running 8.10.183.0 and an ISE server running 3.1.0.518. I have a Production network and a Guest Network. The Guest network has a captive portal where the guest will enter credentials to connect fu...

We are migrating wlc from aireos to 9800 existing wlc is integrated in ISE for 802.1x authentication. inorder to take the ise configuration for wlan in the new wlc, our idea is to add the IP of new wlc in the network device group> all wlc since polic...

Hello all,I have multiple regional locations w/ 5520 WLCs. These WLCs are connected to a Nexus 9k (Services) -> Catalyst 9k (CORE) -> Router. The associated APs are connected to access switches -> CORE -> Router. I have a Guest Wireless SSID set up w...

Dear Experts Community,I need you advice on the designWe have 2 x 9800 WLCs working in SSO mode with 400 WAPs and all SSIDs are configured with centrally switched mode.We have 1 LAG connected to Core Switches on trunk port for corporate data and voic...

Hi TeamTrying to build a secure wireless network for a customer.The customer purchased a new WLC and ISE nodes. Being a healthcare, we kept the security requirements into consideration and designed WLAN.The APs form CAPWAP tunnels to the WLCs, and fr...

Hello Wireless Experts,i am currently setting up a Cisco ISE with a Guest Portal and a Cisco Wireless Controller 5520.We want to seperate different devices in different VLANs after Authentication. This means, that every device has to get a new IP-Adr...

My company has been plagued by an issue that we can’t seem to get to the bottom of. Users connecting to our wireless network are getting “can’t connect to this network”. We have a 5508 as the wlc and ISE as our radius servers. My laptop would intermi...

I'm currently running a POC using Merkai Cloud with Cisco AP's to setup a small WIFI environment.The Merkai Cloud can see and connect to our OnPerm Cisco AP's - All great..The major problem I'm having is when I try and get Cisco ISE to handle the EAP...