Wireless

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Insider User Research program

Labels

Forum Posts

I'm setting up a virtual wireless controller using the guide provided here: http://www.labminutes.com/wlc0001_vwlc_7_3_vmware_installation The narrator mentions your VMware being licensed for "Remote Virtual Serial Port Concentrator". I don't have...

I have a 1262 in the USA and these are my active power levels by rate: AIR-AP1262N-A-K9 show controllers dot11radio0 show controllers dot11radio1 2.4GHz: Active power levels by rate 1.0 to 11.0 , 20 dBm 6.0 to 48.0 , 17 dBm, changed d...

DJX995 by Level 3
  • 407 Views
  • 2 replies
  • 0 Helpful votes

Hi all,I have installed dozens of WLCs but with this one customer rollout I have hit an impasse.  The customer has a 98% MacOS device environment running a 5508 HA pair and 3702i APs.  The Mac OSx users randomly lose access even when their device sit...

We've recently offered users free wifi to use while at work for streaming, browsing, etc...  I tested for a couple of weeks before go-live with absolutely no issues.  Since go-live, it has become so slow that it's unuseable.  They have a 50Mb/s circu...

ahcadmin1 by Level 1
  • 565 Views
  • 7 replies
  • 0 Helpful votes

I try to setup the network "rules" for my public WiFi network. This network should permit outbound TCP: DNS, http, https, pop3, pop3s, IMAP, IMAPs and UDP: DNS, NTP. Inbound none (only established stateful connections from the above list). Can thi...

Hi all, I am deploying an 8500 WLC for a very large scale Flexconnect network. In fact, every AP will advertise Flexconnect locally switched WLANs only. Can I (and should I) map all WLANs to a 'null' interface which does not exist in data centre netw...

Hi Experts, I received a config template for Netflow to be configured in ther 5760.  After applying the commands, everytime a chaned any configuration in any WLANS, I get a popup message (see attachment).   I have attached the netflow config templat...

mcaoile by Level 1
  • 314 Views
  • 0 replies
  • 0 Helpful votes

Hello. I would like to know if anyone can help me with Location Server. In our network we have 1 WCS 7.0.240.0,  4 controllers 7.0.220.0., and 1 Location server 6.0.202.0. After reinstallation of  Location server we cannot add it to WCS (error " can...

Review Cisco Networking for a $25 gift card