Wireless

Hello,1. Set a Static IP2. Apply & Save Configuration3. After Reboot the IP is correct.Then do Reset to Defaults Except IP in the WEB Gui.After Reboot the AP loos the static IP and get a DHCP Address.Reset to Defaults Except IP = Reset to Defaults !W...

Hello everyone,I am working on a wireless design with guest anchor controllers and I have a question. I would like to know if it is possible to offer client SSO to the guest WLAN with two anchor controllers (5508) configure for HA (1:1).  If it is no...

                   Hi All,I have connected a AIR-CAP3602I-N-K9 Ethernet port to the POE port 4 of the WLC. I configured the basic settings in the WLC and it is accessible via Web GUI. The AP page shows no AP detected. The lights on the AP is blinking...

Hi,I am trying to troubleshoot the cause of the wireless AP 1142 radio shutdown; I was wondering where may be a good place to start on it/possibility of the radio shutting down. Once the radio is shown as down; I would just need to re-enable (disable...

Hi,I would like to know how to enable debug output at the console for PMKID caching on my Aironet 1260 AP. I'd like to see when an entry is added / removed from the cache Thanks,Aron

Hello,I have some questions regarding the Flexconnect CAPWAP tunnel for Flexconnect APs with local switching.  1. If I have 10 Flexconnect APs at my branch, would that create 10 CAPWAP tunnels to the WLC located in HQ. 2. How often the flexconnect AP...

I have a Cisco Aironet 340 PCMCIA card that I want to use with an old PowerBook. But I can't find the download for the Mac software for this card. This page tells me to go to "http://www.cisco.com/pcgi-bin/tablebuild.pl/aironet-utils-mac." but it jus...

I have a WLC 5500 controller. I have two WLANS (OBSD-Internal and OBSD-BYOD). I have authentication setup to the WLC for the BYOD WLAN using LDAP (users connect with an AD user account). They are required to re authenticate every few minutes. This on...

In a tutorial video i have found that wiifi is called half duplex. why it is so called?---Posted by WebUser Poristhan Prince from Cisco Support Community App

Hi Guys,I am facing a issue during the MSE backup. The backup are failing.messages errors :Last Status: The last Backup operation has failed. Message: Backup file FTP failed : Server closed connection, reason: Connection closed without indication.jav...

We have a customer that is seriously considering replacing their current infrastructure at all their remote locations with a FlexConnect solution. Their concern is if with the new FlexConnect, do the APs still have to pass all the data to the control...

Hello,We have our controller 5508 running with 7.5 firmware. But now we face user just getting disconnected and asking for reauthentication regardless of any timer settings. It creates lot of issues. When at 7.4 there was no issue. My Session timer i...