XR OS and Platforms

Hello dear ASR9000 masters,Is there any source of (useful ..) information regarding the novel ASR9000v ? I can't find any .. Leave you some questions:Does it have any built-in scalability issues regarding QoS (queues, buffers ..) IPv4/IPv6 Prefixes, ...

Hi All,Im setting up a prefix-set as part of a route policy facing an ebgp upstream transit provider over which I will be running v4 and v6Question is this:  The prefix-set config allows to add both v4 and v6 prefixes to the same list, which looks li...

Dear all,I'm asking about the End-Of-Support date of the ASR9K boxes, I've found some documents about IOS XR not about the hardware itself.Actually we are going to consider bunch of these boxes in the core network, so I wanna know how many years appr...

Hi.I am researching for the recommended ASBR router in a service provider environment.That router will run eBGP peer to an external provider and cater full routes.Intefaces should be multiple 10GE. Currently running 2x10GE.Support for IPv6.And should...

Hi guys, On the ASA device , we can create contexts in multiple mode and login into each context by using "changeto context <contextname> " command to get the running config. Similarly Is there any way to login into non-owner sdr or named sdr from Ow...

Error:    Cannot proceed with the activation because of the following packageError:    incompatibilities:Error:      asr9k-fwding-4.0.3.CSCty86177-1.0.0 needsError:    asr9k-base-4.0.3.CSCtq95393-1.0.0 to be active on the same nodes.Error:      asr9k...

Hi,I am planning to upgrade CRS-1 from existing 3.6 to 4.2. Since I cant do it directly to 4.2, I upgraded to interim XR version 3.8. I have done everything as explained in the URL "http://www.cisco.com/web/Cisco_IOS_XR_Software/index.html". I also u...

I have C7200 Series VXR, manufacture 1997I was press CPU RESET bottom------------- PROBLEM --------------------*** PUSH BUTTON NMI ***  PC = 0xbfc0b960, SP = 0x80005db8, RA = 0xbfc0b990CPU Registers:ZERO = 0x00000000, AT = 0xfffffffe, V0 = 0xffffffff...

When doing a traceroute from VRFx on PE PE1 (ASR9K) to Prefixs belonging to the same VRF on PE2 I notice that for some destinations it reports one path and for other destinations it reports two paths.Both PEs have two links to the MPLS core.  It is s...

                   Hi people I am looking for a  guide that help me to setting up IPoE sessions for the platform asr1006 working as a BRAS. Could someone recommed a document about this configuration topic?