XR OS and Platforms

hello we have an ASR 9010 have only 1 RSP440 installed, and we want to install RSP880 instead.i read on a document thats its prerequisite to have 2 RSP440 installed acting as Active/standby.what happen in my case how should i migrate whats the proced...

Hi, I'm implementing a BNG setup that requires me to format the username sent to a radius server for IPoEv6 authentication (fiber access). Customer requirement is that the username is created through the use of two fields: dhcpv6-interface-id and rem...

Hello,I need your help setting up tacacs + on a cisco ASR 9001.After several configurations, authentication still does not work.Below my config. Thank you for your support. tacacs source-interface MgmtEth0/RSP0/CPU0/0 vrf managementtacacs-server host...

hello I'm looking for the upgrade procedure from 4.x to 6.x thanks in advance

HiDoes anybody know what this logs came from and what they mean ?Konrad RP/0/RSP0/CPU0:Feb 13 17:00:23.175 bgp[3455]: ^H8o^TY^Q^W^Vql"^U^_<q^Q^T(null)(null)Color network (null) (path ID: ) received from 203.3.3.40RP/0/RSP0/CPU0:Feb 13 17:00:23.175 bg...

On 9906, I used the update out originator-loopcheck disable command to disable the originator loop checking for outbound updates.How about on 9901?

I have ASR-1001x router that rebooted unexpectedly, but there is no generated crash fileis the problem related to hardware or software.  

We found a couple issues with this command.  The first is pretty major.  If you do a 'commit' it works as expected and you get a backup copy of your config to your location of choice.  Alternatively, if you do an 'end' followed by 'yes' nothing happe...

Hi, I'm working on upgrading ASR from 5.3.3 to 6.3.3. I've tested this upgrade in the lab and it was very straight forward upgrade. However in production i'm getting some errors.I did install add with the tar file that went ok and now the activation ...

This 9001 router is stuck in boot loop and I have yet to figure this out.  Ive tried 6.1.4 vm file and 4.3.4 vm file load from rommon boot using tftp but neither works.  I get the below errors when I get vm loaded from rommon.  The install completes ...