Hi Got following template in velocity: #foreach ($interface in ${interfaces})#if ($interface.interfaceType == "Physical" &&$interface.portMode == "access") interface $interface.portName#add_interface_prop#end#end add_interface_prop is of course mac...
There is open question to expected sequence of events for DNAC-ISE integration in the following scenario:1) DNAC cluster (optionally multiple DNAC deployment e.g. Author&Readers) integrated with large distributed ISE-cube with ERS (DNAC-2-xPAN nodes)...
Hi All,So I hope someone can help me out below you will see a little sketch on what it is I'm trying to achieve.So I want to discover and provision switch 3 and 4 through LAN automation. now I know for LAN automation the ports need to be in VLAN 1 bu...
Hi everyone,We are trying to create a single Wireless Profile on Cisco DNA Center.This profile is applied to most of our buildings. It contains a FlexConnect SSID that is broadcasted in buildings behind different routers. That means the local switchi...
Hi All, I have been suggested to add L-DNA license min tier while ordering cat8300 routers in autonomous mode. i wnat to know: 1. why L-DNA with min tier required. 2. how bandwidth throttling works without DNA license.
Hello guys,We are currently have a built and operating DNA infra in our HQ, it consist of two Border control/border nodes and edge nodes serving endpoints in the fabric, Borders nodes are connected with 2 Fusion routers which is basically standard de...
Hello community, currently we are running 5520 AireOS and testing C9800 SSO cluster without DNA center.In the future we are planning to discover, provision and manage 2x C9800 SSO clusters in DNA Center. What are your experiences and thoughts so far?...
Hello Everyone,I need to install DNA Center OVA on VM. anyone who has documents with the VM specification requirements, installation procedure can help me here.Also if any one has a procedure to migrate data from Prime infra to DNAC VM can share it w...
Good evening everyone,I´m having an issue after provisioning some access switches through Catalyst Center. The devices are configured with AAA Radius authentication and they work fine with ISE as a radius server. However, after provisioning the switc...
for the operational purpose we need to export hierarchy visualised in Site Scope selection of Application Policy.I think it's only possible with DNAC API, but i'm lost with calls from Application Policy section.Can anybody be of help on it with exact...
Hi, I have a need to move the Default route from the global root table to a VRF, so what i want to do is pull the existing route from the running configuration in to a variable so i can then apply it under the interface. The inbuilt variables do not ...
Hello,We're using a single Catalyst Center appliance, version 2.3.5.6 to provision for PnP. DHCP Provisioning Option 43.Observing the console of the test switch, the pnp session appears to make contact with the Catalyst Center Appliance via TCP Port ...
Hello, I'm trying to integrate between DNA Center and Cisco Spaces, after copying the token from cisco spaces and try to paste it on DNA Center the below error message appear on DNA Center failed to validate Cisco Spaces Certificate, Please check the...
DNAC fails on provisioning brownfield devices that have TACACS configured. What is the intended/recommended workflow for using DNAC to manage brownfield switches? Should TACACS/AAA commands be removed in order to provision? This becomes problematic w...
Hi All,Just want to know how much hard disk space is required on (Red Hat or Ubuntu) for DNAC config and devices configurations backup ?Regards,Talha
