Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Dears,I am trying to configure the MOH for HO internal users and it give me 3 beeps only, the audio file is perfect as it is tested with another cucm, also the Cisco default sampleaudio source works perfect within the HO,the codec used within HO is G...
Hi, Can any one help me on configuration for Cisco 2951We have (1) CP-7942G and (4) 7925G phone and (1) VIC2-2FXOHow can i configure my 2951 CME router.Thanks for your help in advance and need assistance. Regards
Hi,I have no idea how to integrate call phone(just i have CTI route point and call Manager) in asp.net application, this application should have the capability for calling customers by click on phone number ,and open a survey form , and receiving the...
Hi all, Is any one that can help me whit snip of code to find user ID that is logged in to a phone.I need SEPXXXXXXXXXXXX and userID o logout user from the device. Thanks. RegardsJan Meeling
I need to know if I can make support contract for Cisco Call manager ver 6.1.3.1000-16
voice service voip allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip no supplementary-service sip moved-temporarily fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallb...
hello everyone i have a 7970 ip phone .i registered that phone with cucm .but i cannot registered with cucme .i accidently reboot the phone now it cannot upload the firmware.its not even getting an ip address i config DHCP on router and also given o...
We are trying to build an active-active solution for presence and call control using JTAPI with two (or more) servers connected to the same UCM cluster via JTAPI link. All connected servers receive a same event, and we are looking into a deduplicatio...
Guys, I am new to CER solution and the questions bellow will sound probably odd We are in a location where the E911 service is not currently available.Our Customer wants to use the CER to give location détails of the caller who dial 911. We know that...
I have CME 10 and trying to connect cisco 8945 phones but phones are not registering,anyone have already installed cisco 8945 with cme and guide me.
Hi, Need your help here. User is getting Invalid entry error when entering voicemail pin on a deskphone. Issue is not occuring with Jabber. Even if user tries to check voicemail from another deskphone issue still reoccurs. User is able to check voice...
Hello people, I´m trying to configure a environment with COR List and Extension Mobility using SIP Devices. I know that this configuration is possible, and easy in SCCP Phones, because we configure the COR list in the Lines (ephone-dn).About the SIP ...
Hi there. I'm really new at the voice part and also T1, E1 I have one VWIC3-1MFT-T1/E1 wiht 2901. And i saw the configuration of this and blow is part of configuration. card type e1 0 0network-clock-select 1 E1 0/0/0network-clock-select 2 E1 0/0/1con...
Hello, I am trying to configure one PRI in Cisco BE3K system but the problem in last four digit of PRI is not same as 4 digit extension numbers.So in past i opened a ticket with Cisco TAC to configure that same and then they login into CUCM Web conso...
I have a customer that wants to use 8851 and 7841 phones on CUCME.They have 10.5 now and using Fast Track to get the phones registered but the feature set is limited.He specifically wants cBarge on a shared line and talking to TAC it is fully support...
