Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
A user name is still showing up in the UCM directory. I believe I saw an option in the past to delete the end user by going to User Management -> End User-> Search and select the user -> delete the user. But I dont see it anymore. This user also h...
I configure already configure over 50 Cisco IP Communicator and 50 users in a CUCM 7.0.2 using BAT. The issue is that 3 of the 50 CIPC doens´t display the corporate directory, I already try re-installing the CIPC having the same issue.Any idea of wha...
Hey all,I was just told that from about 7.1 to present DLUs were no longer in use. I just found a page that says DLUs can be used up to 8.6(2). CAn someone tell me which is correct?I am asking because I was also told that under DLUs any analog phon...
Our customer has a UC520 with a SIP trunk and 3x isdn 2e Bri lines.For some reason they can only use 1 of the ISDN 2e lines meaning they can only ever make/recieve 2 calls via the isdnI suspect its something to do with the dial-peers but i cant spot ...
The 3905 Model SIP phones are not communicating with 3550 POE switches. Do you have any idea?Regards,Siva Prasad
I have an issue where when a call reaches a call handler and chooses an option to reach an extension/phone in call manager, the call is going dircectly to that user voicemail instead of ringing the phone.The call should follow this path Call --> CH i...
Hello,One of the users asked me to provide me his extension mobility login and logout times for the last week. Is there a way to generate report like this per user CUCM 8.5?Thanks,Marcin
Hello Experts -Has anyone heard of intermittent issues with people not hearing entry/exit beeps on meet-me conferencing calls? We just upgrade to CUCM 8.5 a few weeks ago and that is when the issue began. I have so far been unabl...
Good afternoon everyone!I just did an install for a client with a UC560 running the 8.6 software pack. We're trying to simplify after hours call routing for them and one of the possible approaches we thought of would require users to change the call ...
Does anyone have a good resource for identifying what equipment is needed and how it should be configured in different countries?I'm specifically looking at setting up a circuit at an office in Belgium that I have no information on. Without actually ...
Hello,I have a Cisco Unified Communications Manager version 6.1.2.1000-13 and a Cisco SPA 502G configured as a standard SIP device.I'd like to be able to pickup calls from other users in the same pickup group. On the CUCM side I've placed the phone o...
Hi AllIs it posible that, when anyone call from outside a particular number (E164), during off hours call is been forwarded to two different mobile numbers at the same time.i dont know much about this
Hi All,Does anyone know the track title and composer for the default Music-On-Hold.au file on the CME 9 ?jacky
hello I have 280 VG224's fully populated, i need to change partition on the extensions configured on the FXS portsall the VGs are setup as MGCPwe have ucm 7.1.3 and ucm 8.6please let us know if you know a way to bulk edit all those extensionsthank y...
Hi,I would like to ask you all for little advice.I need to configure inbound ringback. We are recording calls from CUCM and I need to have this recording started immediately with "ringing".Situation:somebody from PSTN call my collect number on voice ...
