i am using 7940 g, with 2960 and 3560 switches. i am facing a problem of "tftp timeout error". port is configured as switchport mode access switchport access vlan xxx spanning-tree portfastplz, any one have solution, provide.
i am using 7940 g, with 2960 and 3560 switches. i am facing a problem of "tftp timeout error". port is configured as switchport mode access switchport access vlan xxx spanning-tree portfastplz, any one have solution, provide.
Hi All,I have a question if UCM 9.0 license calculation is different than for 8.6 .If I have following license calculation for 8.6, then would it change somehow if I propose the same for UCM 9?CUCM-USR-LIC1Top Level Sku For User License1MIG-CUCM-USR...
Hi,Can someone tell me if there is any issue if we run a cobra when cisco unity is running, or should I stop the service before.I want to know if the is any critical issue to run cobra an get all user mailbox and cisco unity configurationsRegards
Trying to get my head re-wrapped around QOS. Looking at the marking map on 2960s and 3560s and I get this... How do I read this? The docs don't give me a hint at allDscp-cos map: d1 : d2 0 1 2 3 4 5 6 7 8 9 ----------------------...
Is there a way to register Cisco IP Phones to UC520 over Internet without VPN?We have the following:Cisco UC520Cisco 7940 IP PhonesSoftware Version: 15.1(2)T4Device Type: UC520-8U-4FXO-K9
Hello guys,i have a question to the AXL programming. Today i looked for tutorials to make a small programm, maybe just to configure one translation pattern.But when i search at google, i´ve found only tutorials which dont show the whole process. (a s...
Hi,Today our customer got a mail from his PSTN provider stating that there was a call made to Negative/Suspected Country on 3rd August of 367 minutes duration. So we are investigating on this now. I pulled the CDR report but there was no call which w...
Hey,In CME can we have Distinctive Ringtones based on the calling number
Hi all,I need help configuring 2 h323 Gateways.I am using CUCM 8.6 and 2 2911 GWs.Our system is as follow:Route list containing a route group with both gateways in a circulat mode.Each GW contains 8 FXO ports and an E1 For mobile calls, i want to use...
Hi guys,I was searching for cipc with cuva or cisco mobile or cisco unified mobile communicator or jabber that could support video calling for my Mac, ipad and iphone to be supported on the cme and UC500 platform being in the same network as well as ...
Hello Guys,i guess this will not work but maybe you can help me with that.My customer want to be informed via Email, when a specific device is unregistered. Is this possible with the RTMT?Best RegardsDaniel
Hi All -Thanks in advance for your help/ideas!I help manage a global CUCM infrastructure and we have a large problem with users moving their phones between sites. While the phone registers and works ok, it creates a management nightmare because the e...
Hi,we have a CUCM 8.6 cluster running; now we want to connect a paging system to our IPT so users can do paging from their phones.The paging system requires an analog connection, when there is a call to the analog line, the paging system will accept ...
Hi, guys...I have an issue, I cant tranfer calls from the CISCO IP Phones 6921 and 7942, both using SCCP protocol, to an IP Phone 9971 using SIP protocol.They all are registered to a router with CME 8.6, they can make calls each other, BUT, when the ...
hi,We are facing a problem with CUCM version 8.6.2 inspit of configured Cisco call manager service Maximum MeetMe Conference Unicast to 12.not more then 4 person can participate in it.thanks in advances.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
02-10-2025 04:39 AM | ||
02-07-2025 02:45 AM | ||
02-04-2025 01:17 PM | ||
02-04-2025 06:55 AM | ||
02-04-2025 01:31 AM |
User | Count |
---|---|
3 | |
2 | |
2 | |
1 | |
1 |