Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi All, We trying to upgrade the CUCM 8.6.2a restricted version from 6.1.5 SU3 . We gone through the readme document of Refresh cop file 1.1.*** If upgrading from a 6.1(4) or 6.1(5) or 7.1(3) version to an 8.6(x) UNRESTRICTED version, only this ...
Dear all:I need some light to continue troubleshooting a Ring Back tone issue. The problem is that it is only happening when someone calls to the USA DID number from an USA line. ( I tested from an Argentina trunk and Germany trunk and there is RBT)I...
Guys,I am trying to do an export of phones from an existing cucm 4.1 cluster for migration to a new cluster. I observed that BAT does not export all the data. Some phones were missing in the export even though they are present in cucm database.When I...
Dear All ,I have two Cisco Cius and I added the phones on the CUCM 8.6(2) , the phones makes and recives calls normally , my issue is in activating the corprate directory and extenstion mobility services on the Cius phones . so can any one help me in...
Hello community!I´m having the following problem. I´m installing CUE with CME 8.0/IOS 15.1(1)/2901 ISR2, and I´ve already installed CUE 8.6 software on the module. I also did run the initialization wizard using the CUE web interface. In the CME, I´ve...
Hi Guys,I need to put an warning message in a hunt pilot, so I want to create a DN which redirects directly to a MOH. Anyone knows how to do that? Or if this is possible?Thanks
So users had some functionality on their old PBX which I need to replicate on CME 8.6.I have a number of parallel hunt groups with user DDIs as members :-voice hunt-group 17 parallelfinal 2693list 2146,2149pilot 2662 The users have requested that whe...
Hello. I have an issue where phones randomly appear to go out of service. I had to restart one of my gateways due to some maintenace yesterday and this is when the issue started. Basically I power cycled the gateway which is talking MGCP to my single...
Dear Experts Is their is any way to change the Extension numbers with new ones if yes could you please provide me the steps to chage the existing DID/Extension range 1xxx to 3xxx by using Cucm7.1.3 BAT for 200+ numbers.Thanks
Hi all, I found that then I configure a Call Forward All by pressing button in a phone, the CFA CSS of the phone in the CUCM will changed automatically. Is it should be like that? How can I make it does not change? thanks in advance.
Every time I dock the Cius in the dock it states that there is a software update and the Cius will reboot in 60 seconds unless the update is delayed. After rebooting while docked the Cius does not rompt for this again until the Cius is removed from ...
Hello there,We are performing upgrade of a firmware 3.6(6) ( last firmware) to the MCS 7835I2-K9 servers to a whole cluster containing of 7 subscriber and 1 publisher for version 8.0.3. I downloaded the ISO file from Cisco website ,burn it to Dvd wit...
Hi All, we have two GKs communicate over H.225. Call setup is successful and two endpoints communicate with each other, each one behind one GK. after about 10-15 min, call is dropped. after run debug in GK, I see following error message. if you have ...
Right now I am in the middle of a migration away from a bunch of old digital PBXs to a Cisco VoIP platform nation wide. I have my my CUCM cluster configured and most all of my big sites and contact centers done so now I am moving onto my smaller site...
Hi,I have a problem with Cisco 7911G phone.When turn on the the power at the moment the red lights are flashing and after it lights up only one green "Applications Menu".The display shows nothing.The phone does not get any address from a DHCP and TF...
