IP Telephony and Phones

Resolved! CME QUESTION PHONE FIRMWARE

I have seen some times that some firmware are added using extension. Loads and some times without extensions.7911 is .Loads and 7940 is without ... Why is this ??

Resolved! CP-8861-3PCC-K9 Upgrade Failure

I am attempting to upgrade our newly received 8861-3PCC phones. I have read over the forums and believe I understand the two methods: Upgrade Rule and "Browser Command" The problem I am having is that the upgrade fails in one of two ways: either the...

Region System Defaults and OPUS

Hi, I want to use OPUS at 510kbps for most of my calls between sites. So it makes sense to set the system default for interregion calls, and intraregion as well for that matter, to 510Kbps. However the maximum setting is only 256K. Am I missing somet...

MediaSense Search and Play with NAT

I have a MediaSense V11.5.1 server that I have open to the Internet for the Search and Play feature. I am using a one-to-one NAT and have TCP/8440 and TCP/8446 open. Users access the server using a FQDN and can login and scroll/search the media fil...

Resolved! Cube HA Question

We are looking at upgrading our UC environment this year and the first thing I want to do is get both of our cube routers on the same hardware. I have spoken to my manager and they have approved for us to purchase 2 4431 routers to replace our 2921 r...

Resolved! What equipment is need to build a CUCM lab at home?

Hello, my apology for not posting a technical question. I'm a Avaya tech who wants to learn Cisco CUCM by building a mini CUCM home lab. I'm seeing a lot CME lab kits on Ebay however, I believe CUCM and CME are completely different from each other ...

Disable Option when users access to Voice Mail

HelloI have integrated CUCM 12.0 with CUC 12.0 using SCCP and my users can access to voice mail after introduce pin, but I want to disable this: *Option 4 related to programming options where the users can change greating, messages configuration, pre...

Resolved! CUCM Call Pattern not applying

I am looking to change our "Dial Out" number from a "9" to a "7". To avoid ruining our current settings, I copied the existing call patterns and changed them to start with "7"; however, it seems as though this new pattern is not applying. Do I need t...

No audio or static on incoming SIP calls

Call flows is as follows.PSTN--->Verizon SIP trunk (MPLS Ethernet)--->3750X--->CUBE (2921)--->CUCM (8.0.3 running on 1 pub and 2 subs)---->Remote routers (28xx and 29xx) -->remote switches (3xxx and 2xxx models)--->IP Phone (79xx)CUBE, CUCM, and 3750...

Resolved! Block incoming call on Cube

Hi EveryoneI was asked to block a number that is calling the head of HR everyday twice a day, I wanted to know if someone can look over my configuration and make sure this looks correct before i add this to the Cube router, and thanks in advance for ...

Cisco 8945 Bluetooh headset, Does hookswitch option has been deleted?

Hi,Running: CUCM 9.1.1, Cisco 8945G (firmware 8945.9-3-2-11).I have installed a bluetooh headset with a Cisco 8945, right now is "working" but call can't be answer if the Phones' s Headset button is not pressed so it 's not a "wireless" solution. For...

MoH in Conferences

Hello I want to know if it's possible to put MoH during a conference? I know this could be sometimes annoy but for what I want to do its necessary

While in SRST (SIP Phones) it takes 12 seconds for a transfer to complete

Hello all, looking for some help. When I'm in SRST Mode (all SIP Phones) it takes 12 seconds for the phone I want to transfer to to start ringing. I press Transfer I get dial tone right away, I dial my extension then I have to wait 12 seconds before...

Login Failure Events on Exchange server

We are seeing several login failures on our Exchange server at the same time every hour. The caller process name is w3wp.exe which is an IIS process. Looking at the IIS logs on our Exchange server, we are seeing log entries that mention Unity at the ...

Device onboarding activation code format when phone without camera

Hello, what is the format of the activation code that should be enter when using device onboarding feature on a phone without camera. We tried with xxxx-xxxx-xxxx-xxxxxxxxxxxxxxxxxxx Nothing works Thanks

IP Telephony and Phones

Forum Posts

Resolved! CME QUESTION PHONE FIRMWARE

Resolved! CP-8861-3PCC-K9 Upgrade Failure

Region System Defaults and OPUS

MediaSense Search and Play with NAT

Resolved! Cube HA Question

Resolved! What equipment is need to build a CUCM lab at home?

Disable Option when users access to Voice Mail

Resolved! CUCM Call Pattern not applying

No audio or static on incoming SIP calls

Resolved! Block incoming call on Cube

Cisco 8945 Bluetooh headset, Does hookswitch option has been deleted?

MoH in Conferences

While in SRST (SIP Phones) it takes 12 seconds for a transfer to complete

Login Failure Events on Exchange server

Device onboarding activation code format when phone without camera

Hearty congratulations to the December Spotlight Award winners!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

Incoming calls show as forwarded

CUCM sends wrong device ID to Recording System

CDR reports: Request for activity on multiple lines

I get dozens of these alarms on WU, but no errros on controller

Transfer Caller ID and 8800 Line Buttons CME

Cisco Jabber

IMAGICAL BILLY BLUS

CUCM CAP-RTP-001 and CAP-RTP-002

Issue with ciscocm.enable-sha512sum-2021-signing-key-v1.0.cop.sgn inst

How to setup SAML SSO authentication in Expressway C