Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I am running OCS R2 with cisco cm version 7I have followed this guide but still not able to get Caller id from cisco to OCS and vice versaany one got this working?http://theucguy.wordpress.com/2009/08/10/no-name-appears-when-callings-from-oc-to-cisco...
Anyone out there tried cuci moc behind a firewall? what specific versions are best suited/stable for it from ASA viewpoint.Also, input any other suggestions pertaining to this.Appreciate all help!
Hi All,Is there any non office hour settings in the voice mail configurations. We've like this 6600 is a Hunt Pilot. (Hunts to 6604, 6605, 6606 in Sequence, if even 6606 is not answering call shud go to VM of 6604). this is working now. But i need re...
I have a setup with two separate CME systems that can talk to each other using 3 digit extensions over a WAN link but each has its own SIP trunks for PSTN calls. If a call comes into CME_A on its SIP trunk can it be forwarded to an extension on CME_...
HelloI have phones 7970 that when I talk by Speakerphone the audio quality is low but the headset the quality is perfect.This problem appear when I upgrade CM 4.1 to CM 7.1 the firmware version of phones is 8-4-1.Any Idea of This Issue?????Regards.
Hi guysIs possible do the follow script AA on NM-CUEPlay prompt: Welcome to company xyz, dial the extension or waitIf timeout (wait): call redirect to extension yyyy.Is possible the user dial the extension without add the extension on NM-CUE (using j...
Hi All, Please let me know if you have any tool or procedure to calculate resources (hardware/software) utilized only for metme conferences. I want to show resources utilized for meetme conferences so that we can advice our customer to opt for meeti...
HiI'm with CUCM 7.1.3 on VM.I want change the DNS, actually dont have DNS setting.I'm use the demo license from CUCM installationDid somebody see this message when we try dns settings?admin:set network dns primary x.x.x.xWARNING: Changing this settin...
Can someone point me to a TCL script that answers all incomming calls, then plays a meaasge "your call may be recorded etc" and passes the call onto the origional called number. I'm not familiar with TCL scripting so I would like a complete solution ...
Guys,I have a Cisco CUEAC server that has been running for about 3 days. The customer has brought to my attention that when a call is answered using the CUEAC software and then transferring the call to an internal number---the orginating caller does ...
Is there a possibility to forward our ip phone to voice mail only after working hours on call manager?Regards.
Hello,We just upgraded to MP7 server over the weekend and most things are fine except for calls coming from remote clusters over ICT and Wan Link back to cluster in Ohio.My call flow is as follows: Inbound calls from other clusters over ICT’s (wan li...
Hi All, I need to replace some license files on a cucm 7.1 system with new ones that have the same name. deleted them using the command file delete license and is also confirmed on the GUI but when try to load the new license files I get an error say...
Looking at a lot of SIP config examples for CME I see that many configs show an inbound dial-peer for SIP trunks but others do not. Is the inbound dial-peer needed? What is its purpose?ThanksDiego
Does the ip phones 9971 and 9951 have MIC (Manufacturer Installed Certificates).If so, how do I get the public ca certificate of this MIC?On the 7925G it can be downloaded via the phone's web interface, but there is no such menu option on 9971.
