Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Greetings everyone,we are about to introduce voip into our infrastructure, i have zero experience with the above mentioned topic.i am not really experienced with switching.what are your suggestions, where to start reading about the topic?i need help ...
Can someone share a copy of the QoS configuration from the ports connecting the CUCM in the Data Center?
Hi,I would like to create a customized user account that has administrator access to ”Cisco Unified Serviceability” ”Cisco Unified CM Administration” ”Cisco Unified Reporting” ”Cisco Unified OS Administration” ”Katastrofe genopre...
Dear All I have 2 call mangers 4.x the first one act as a primary at the HQ and the other is subscriber (in Different Location) with fail over WAN Scenario with a 512kb frame relay between them The total phones registered on both sides is about 250-2...
HiI have UCM 6.0 and voice gateway 2811 registered to the UCM using H.323.How to configure a direct line (Incoming/outgoing) using FXO?-- for incoming no problem I configured a connection plar opx under the voice port-- for outgoing I have a way to a...
I would like to implement an Alarm solution. An enduser should dial a number and then a record should be played on all speakers (like a pagger) and a long text string should appear on all phones at the same time.Does anyone knows howto implement this...
After several attempts to reset to factory defaults due to continuous reboots, my phone shows the death message "SOS: PhoneInRecoveryMode".There are no blinking LEDs, but I can still ping the phone to it's IP address.The firmware version is 5.1.8, ha...
Hi everybodyI am installing a Cisco Call Manager and Cisco Presence server and i have one principal office and 2 branches offices and each one with LDAP.There are any posibility to enable the CUPC can search in each LDAP server and chat, add or remov...
Hello All,I'm trying to setup a CME system that will span 2 very small offices that will be connected via site-to-site VPN. Each location will have PSTN connectivity via FXO. 3725 router with Catalyst 3524-PWR on each site. 7970G phones. The goa...
Hi i am trying to upgrade cer 2.0.4 to 7.1.1 have upgraded published by dvd but no rebooted now i am trying to upgrade subscriber but it fails from the same dvd as well as sftp i am wondering do i have to reboot the publisher and make the 7.1.1 the a...
I'm not very familiar with Attendant Console but I received a question from a user and I need to determine the best approach to solving this user's issue. There's an extension which is shared by two users working different shifts. The alerting name...
Hi there,having configured a call forwarding ("forward all") on IP phone A to IP phone B (same partition)will provide information on B's display that the call is being forwarded by phone A. So far, so good.Unfortunately this information is not displa...
HelloI am trying to figured out a way to create a custom softkey button that does the exact same thing as iDivert but instead of going to voice mail. I would like it to go to a specific extension. tWe are a call center and we have certain numbers tha...
Hello, I've been using QSIG tie lines between Nortel and Cisco networks with no problems (mostly) for the past couple of years. This morning, I noticed that caller ID name presentation is not working in either direction. Call ID number presenta...
I am trying to upgrade my CUCM server from 8.0.2.10000-24 to 8.0.2.40000-1.When it tries to read the CD it states: An error occured while accessing the upgrade state file. Please verify the status of the local filesystem.Does anyone know why this wou...
