IP Telephony and Phones

Hi.One of our customer wants give some access to few users from the admin page. Custome is using cucm 6.1.Example, customer wants to give ROUTE POINT PAGE ACCESS TO FEW USERS, How to make it. is it possible.regardsEsa

I have problems with Toshiba DP120 F fax machines receiving faxes via an ATA 186 and an H323 gateway. The gateway is configured with "Modem passthrough nse g711ulaw" and the ATA has the audiomode 0x00150015 and connectmode parameter 0x90000400. Has ...

Hi All, I am figuring out how to configure clocking for a 3845 isr with about 10 E1s correctly. At the moment, the router has 1 clocking domain (all VWICs, NM are participating on this domain). I configured e1 0/0/0 to be the 1st choice clock sourcec...

The default uc500 config (using cca) puts fxo ports in a hunt group and applies the hunt group to the pots dial peers.Problem is if one fxo trunk is oos, the hunt group does not hunt around .ie unplug trunk 1, and outbound calls are busy signals. Har...

Does anybody knows a utility to remote control (answer, transfer, hold, etc) an IP Phone on CallManager Express?Thanks, Oscar Perez

%MGCP-3-INTERNAL_ERROR: mgcp_cfg_commands: nvgen lawful-intercept: should not happenHas anyone come across this error before?

Do any body know the max number of outside parties and inside parties that can participate in a conference in call manager 6

Can I configure CMM module on core switch (6 E1 sub module as MGCP and H323 gateway)in the same time to register on call manager 4.2

I have 5 CCM clusters with 5 Corporate Directories. Is it possible to create a replication agreement in SQL from one CCM to the others and sync the directories? I'm tired of updating 5 CCM directories.

Hello All,Could someone please tell me or point me to a document which compares Meeting Place Express with Meeting Place Etnerprise? What are the differences btw these two products other than huge $$$$$?Thanks,

i need to connect my analog phone's with ccme but i havn't fxs card on ccme or analog gateway like VG224 i have Quintum AFG to provide interface for analog phone, can anyone help me out how i can do this .........

I have a client that wants to use mobility i.e cisco features on the handset. I can see for nokia they can use call connect and some DLUs. Whats the options for windows mobile devices?

quick checkI have a 3845 with 2 E1 cards, I have total of 60 channels. so do I need a pvdm2-64?this means I can support up to 64 simultaneous G.711 calls?

HiWe are having a customer request, where they want the Calling Party should be notified by a beep that the Called Party is busy on another line.Scenario:IP Phone-A makes call to IP Phone-B. But the IP Phone-B is already on a Call. Now the IP Phone-A...