Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi all,I recently installed a UC500 for 5 users. The setup has 3 7921 wireless IP phones and 2 analog phones. The setup is such that the main extension is on an analog phone so that if the UC500 is down, calls can still be received from the PSTN. My ...
Hello,I have a 2811 router configured as an H323 with FXO ports going to the PSTN. I also have CallManager 6.1 and I am trying to figure out if there is a way to configure call waiting on the FXO port so that when a user is on the phone and a second...
I am having a strange issue with my CallManager and 2851 Router with a T-1 PRI connection to the PBX. Users can dial into the VOIP network and dial out to the PBX no problem but when they enter voice mail or MeetingPlace and enter digits they are du...
I am looking for the SQL statement that can be used in a query (Query Analyzer) against the CDR database to convert the format from Epoch to MM/DD/YY 00:00:00. I've googled "Unity Epoch time" (as mentioned on one forum posting) and even asked TAC, bu...
Hello,I'm testing mobile voice access, and I noticed that the calling name does not get sent to the H323 gateway for Caller-id purpose. (I did a debug isdn q931 and only saw the caller number.)Can anyone suggest what may be the problem?Thanks,-Dave
Hi all,I got several lines and its possible to call all of them over line group and hunt pilot (one defined number - you call and all phones in group are ringing). And there is problem, I cannot adjust this hunt pilot number to the call picku group. ...
Hi, I have a problem with my SIP trunk to my voice carrier. I have CUCM6 with a SIP trunk to a CUBE and then a SIP trunk from the CUBE to my carrier. When I make a call from an internal phone to a PSTN number I see a SIP INVITE hit the CUBE but the c...
Hi,I have an UC520 with a couple of 521 IP Phones. I configure the UC520, plug the phones to the integrated switch and they don't want to register. The display keeps showing "Registering"... "Initializing Network"... "Downloading SEP<mac>.cnf.xml" .....
Hi NetPro.I have a CCM 4.0.2aSR1a cluster in a production environment. this server will be a upgrade to CUCM 6.1.2 in a new servers. for this reason, installed a CCM 4.0.2aSR1a in other machine to work whit the database. (upgrade to the 4.2.(3), run ...
Hello,How can i change the timezone of CUOM without re-installing the OS.it's not recommended to change the time after installation. Thanks
The headset jack appears to fit 2.5mm headsets, but I can't get any to work. You can hear but not be heard. Is there a specific adapter or headset model that I need?
I would like a user to be able to log into call manager but only have add, modify or delete rights. User should not have admin rights, but can ADD/REMOVE PHONES.
Hi,Would like to know anybody have the solution for those ip phones having 2 lines or 4 lines without sacrifice any line call forwarding to a radio channel ?Besides using the speed-dial softkey of getting the radio channel is there any other alternat...
installing unity 4.2. (Off box UM)at the point of running message store config wizard, lets me select my mailbox location, then goes straight back to initial "run message store wizard". Anyone seen that
What's the use of configuring a Voice Mail profile in Call Manager?
