Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
HI Guys, After installing the CDR services, i was getting problem in restarting the tomcat service, but i restarted the server and tomcat is running fine, but when i tried to login in CCM admin i am getting error "HTTP 500 internel server erro...
Hi,Where can I find IP Phones supporting this LLDP protocol (v6.1.2)?Thanks for your help
I have a system with 4 FXO ports and I have a total of 16 dial-peers configured for these 4 FXO ports. The 16 works out to 4 dial-peers for each FXO since each dial-peer matches different outbound call types such as local, ld and intl. Can I use a ...
Hello,I have a 2801 with the cme ver 4.0.2.I want to connect 7945 and 7937 conference station. I think the ios that supports the 7937 is ver 4.3.I tried to install it but there was a problem in the pstn lines after one minute every telephone call was...
is ccm 6.1 have inbulid Intracluster Extension mobility feature enable. if so can anyone share the docs pls.
hi all , i have MGCP gateway registred and its E1 and FXO endpoints. im not able to see the E1 on gateway or its endpoints on the route group member . i did search but nothing appearing i only can see the FXO. while if i program route pattern i can...
Hi,I configured 2801 router as gateway through mgcp with CCM 4.2(3). Gateway has FXO modules with analog lines. Outgoing calls are fine but when someone from out side dial inside and phone inside start ringing. If caller disconnect call but phone wil...
Hi,I've got a 2821 with 5 BRI and 4 fax on this EVM-8FXS modules. (EVM-HD-8FXS/DID)I've configured the gateway in call manager.Everything is going well with the IP Phones.The fax could send faxes outside and between them but they can't receive faxes....
It's seems CME doesn't support callerID number formatting. By formating I mean if incoming number is +12345678900 I would like show it to end user phone like this +1 (234) 567-8900.Does CallManager 6.0 have this functionality?
I think i have a issue in the switchport configuration of the VG248. When 'switchport voice vlan 10' is configured, the VG248 will not communicate to the entire network. Instead, when 'switchport access vlan 10' is configured for the same vlan, it wi...
where can I download Call Manager ver 4.3Thanks
Hi All,Yes, I know that VMware deployment of CUCM is not supported by Cisco but nevertheless...I am trying to build a CUCM 6.1.1.2000-3 Pub for my home test lab. I am using VMware server 1.0.6 build on Windows 2003 SP2 server. When I am installing CU...
This is a strange one.H323 gateway and CM5.1Calls from a remote WAN site are having garbled voice issues when leaving Voicemails (UNity connection 2.0), when I do a packet capture, I see that packets sent FROM the Wan site are tagged correctly (ef fo...
Hi, We are having a cisco UCM (Unified Communications manager) cluster The real time monitoring tool has generated an alert saying as “Low Available Virtual Memoryâ€. I am attaching the screenshot of it.Any ideas how to resolve this issue. Rgds., ...
HiHow can I know what sccp version the phone is using?SCCP 1.0 or 1.1 or 1.2Thanks
