Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello, Our client would like to add new headers to the invite message. They send P-Asserted Identity header as below. They want to parse this header to 3 sections and they would like to give every section a new name. Is this possible with SIP profil...
So I am stumpped... I enter this command... tftp-server harddisk:/phone-configs/SEP74860B95756E.cnf.xml alias SEP74860B95756E.cnf.xml I get this response... This alias is already being used. Please use another alias There is no aliases in my run...
there is no CUBE between the telco and CUCM Could you provide some guidance on how to resolve this issue?* this call flow work on another telco.*Works for landline calls but not for mobile calls
Hi, I have configured a VG410 48 port gateway for use with CUCM. The CUCM cluster does not support the VG410 as an SCCP gateway so I have configured it as a SIP device and pointed a CUCM SIP trunk to it. Calls seem to work ok but after a seemingly ra...
We have cisco 6821 MPP phone registered to CUCM 14 as a third-party SIP phone. Basic call features are working fine and no issue with the calls. But whenever we want to access recent call log, contact, speed dial, it prompts for password to sing in. ...
Hi, I have a customer on CUCM 12.5(1)SU4. They use Call Pickup groups fairly extensively but have started having problems with some of them recently after phones were moved between offices. One CPG has two phones (User Device Profiles logged into 784...
#Team #Cisco #CommunityI need information if Cisco Call manager BE 6000 M6 running with V12.5 can be integrated with UCS-C220-M4 running with V11.5?Can I assign BE 6000 M6 running with V12.5 in an existing cluster as a subscriber Node, where there a...
I'm encountering an issue with adding new phones to Cisco CUCM 15. When I attempt to add the phones by navigating to Device -> Phones and selecting "Add Phones," the devices I want to add, specifically the DP-9841 and DP-9851 models, are not listed. ...
hi all,today i need to add some help if any one face one way connection audio issue in same vlan,i mean i have 2 IP Phone 7841 with same vlan 192.168.15.10 and 192.168.15.11.now the the issue is user (A)192.168.15.10 can not hear (B)192.168.15.11, ...
I didn't see anything in Settings on the phone itself - is there a way to change the voicemail message waiting light from blinking to steady?
I know the simple answer is when the phone loses communication with Call Manager.But it seems there other conditions where this can happen. I have a condition where every time I make a call to a particular SIP provider, the phone goes into Preservati...
Hello all, I've 2 CUBEs in production that are fine, however recently installed 2 new CUBEs with a new SIP service provider trunk. I have 2 different call manager groups, inbound and outbound works with a 1st call manager group. But if I change to t...
Hi I have setup as simple as it gets: CUCM, CUBE 4331, SIP trunk to the provider through CUBE. 711a all the way through. When I call mobile phone from CUCM, phone rings, but as soon as I answer it it is disconnected. I see on CUBE that immediately af...
Hi, Im using this router with this license install Technology Technology-package Technology-package Current Type Next reboot ----------------------------------------------------------------...
Hi. I could use some help getting SRTP working on the WAN call legs of SIP trunks between two two CUBE virtual routers (c8000v with Network Advantage licenses, and IOS-XE v17.10.01a). Note that I would rather not use SRTP on the internal call legs b...
