Other Collaboration Subjects

Does ISN/ICM support speech concatenation? I have some prerecorded wave files such as jun.wav for "jun", second.wav for "second". Is there a way to prompt "Jun second" when I pass in "06/02"? Does ICM script support that automatically or do I have to...

Hi, I've installed a central callmanager with an E1, it has a remote site connected which shares this gateway, it is connected with a 2mb leased line with QoS enabled. I can currently call IP phone (siteA) to IP phone (siteB) with no problems. I can ...

HiI have just fitted a h323 gateway and connected an isdn2, the line looks ok. When i place a call via an ip phone and callmanager, the digits appear to be dialled out ok but the line disconnects as soon as the last digit is received. Any ideas?the i...

Hi!It is very important that I find some answers to my customer's questions, because we're in the last stage of negotiations. So, please, if you can help, I would very much apreciate it.I am trying to use Unity 4.0.3 as AutoAttendant, in a centralize...

HiI have installed version 3.1 of CME and have attached 1 7914 to a 7960. I have added the load cmd for the 7914 and also added the type cmd under the ephone object.I have then assigned the buttons 7,8,9 to some other ephone-dn but when the phone loa...

I got CCME running on a 3745 with 8 FXO ports connected to the PSTN. I also have a single ATA with one port connected to the security post at which calls need to be forwarded from the operator at the end of the day (this is done by using the CFWD sof...

Dear all,Please help.....I am using VoiceXML in CRA3.0, when i write a tag that accept DTMF input, i found that it will support DTMF and Voice Reg. simultaneously, is there anyway that can disable the Voice part and accept only DTMF ?In VXML2.0 stand...

Hi,I am running call manager 3.3.3 with 7940 and 7960 IP Phones. I want to display a message on the screen of all the IP Phones. Pls. let me know how I can do the same. This is maily used for passing out some downtime related informations to all t...

Can IPCC Express 3.1.2 be installed on a system that already has the OS_2000.2.6 service release installed? I am trying to install this on a new IBM server, but the IBM server requires 2000.2.6 for this particular model of IBM (x345) server.Thanks i...

Does anyone has a link to download the latest scripts and CRA editor.Thanks

Dear All,My local site has a Cisco CallManager 4.0 and a Unity 4.0. I have a 50 user license for Unity VM and I only use 30.I am now setup a new remote site and I will setup a new CallManager. However, can I use the Unity VM Server on the local site?...

After a CMM reboot the command"no isdn outgoing display-ie" appears again and must be changed manually to "isdn outgoing display-ie".Any ideas?Alex

My hardware platform is below:HP DL320 G2 P4 3060MHz, partnumber:336549-002I install CallManager from CD-Rom, I insert the first CD(Hardware Detction),everything is OK,but when Hardware Detction pass,the following screen display:===================78...

Can anyone tell me how I can tell if my Raid is working correctly? This is an MCS 7835I ( IBM ). I see the disk 1 in the array configuration but I do not see it in the win 2000 disk administrator?

I am configuring SRST and it appears I cannot dial outbound Long Distance calls over my AT&T LD T-1 (4-ess switch). However, I can complete the outbound long distance calls over my local Verizon T-1 (5-ess switch) no problem. Has anyone run into th...