Other Collaboration Subjects

I have a DMM 5.2.2 version and 10 DMPs with de same version that are installed in remote locations. What should I set in the DMM and DMP for storing content locally?I know that the content is sent via FTP, I configured the FTP service on the DMP, but...

Hello,I seem to have a poblem across my wan. I have CME on 2851 with unity express 2.3 on both sides. When I place call across the wan the call is fine, however when the call should transfer to voicemail I get a fast busy. I should also mention that ...

Planning to have centralized CCM 4.0 and Unity 4.03 but to reduce WAN traffic intending to have a Unity Express at each remote site.Is this possible? Would I be able to direct remote offices phones to the Unity Express and all central IP Phones to C...

Migrating to CME 8.5; Call Recording feature assistanceI am needing review assistance on ensuring that i do have automatic recording features available when i migrate to Cisco CME 8.5.Any suggestion, advice and technical leads details on how to go ab...

I have two cisco 5350 with the following setting:Originating cisco :!voice service voip fax protocol t38 ls-redundancy 3 hs-redundancy 0 fallback none!dial-peer voice 1 voip huntstop destination-pattern 111 session target ipv4:xxx.xxx.xxx.xxx tech-p...

Hi,I am trying to use a Cisco DMP 4310 with a standard power injector (PRJ3) but it seems that the DMP doesn't start. I tried using the power injector with a phone and also with a wireless access point, it is working.I also tried to plug the DMP to a...

Hi Guys,   For a meeting place solustion, Is it must to have the MP Media Server ( MP 35XX) ? Or can we build up the solution only with Application/Conference server ( on MCS server) and MP Webex node ( on MCS server) ?ThanksRagu

Hello all,I am curious enough to ask all you that have the DME 1100 encoder the following:What is the maximum time/length covered for a live event using the DME?Were you storing at the same time?It seems that the DME cant handle this more than 2 hour...

i am new to cisco .how to activate managed switch port.

We have a CM 3.14(b), we have an extension number asigned for meet-me, the problem is when i dial from PSTN to this extension number, hardly ever the call is connected, the question here, is possible dial from PSTN to meet-me extensión?

Is it possible to setup a password for MeetMe conference? Thnaks for the advise.

How do you determin the maximum number of participants for MeetMe conference? All participants will join the conference via the PSTN with the exception of the initiator.

Does anyone know of a way, 3rd party tool or Cisco workaround, to allow users to dial a Meet-Me conference number and if the conference holder has not started the conference yet, to allow callers to be placed in a que and then brought into th...

a. Is the Cisco Unified Communications Manager available only for Linux? b. How do we get the developer (login, password,etc) credentials for development?c.  How do we make the application live so as to make and receive PSTN,etc  calls over ISDN. Do ...