i have 3945 router , what licence do i need to activate MPLS ?
i have 3945 router , what licence do i need to activate MPLS ?
Team,I have looked for a definitive answer on this and while there are many discussions on this I have still not found a good way to do the following.We have been granted 5 Ip addresses from the provider (/29) we have 4 internal web servers. We would...
Hi Team, Where to get MIB files for below device, I checked in MIB locator, it is showing invalid image name. ISR4321/K9 Image : isr4300-universalk9.03.15.01c.S.155-2.S1c-std.SPA.bi
Hi, I need to take similar output from more than 50 routers. ( a show run basically) . is there a telnet client where I can connect 10-15 routers in one shot and issue a show command on all of them at the same time ? Thanks in adv
OK, kind of a stupid question, but I have not done this before. We have a 4451 that is still running 15.3 IOS. We are going to upgrade to 16.2, but confused by looking at the documentation on doing this. Do we have to download the .pkg file and upgra...
I need to block all traffic from my guest wifi on vlan 17 from accessing anything on my management vlan 10 and secondary vlan 11. The problem both my DHCP server and my DNS servers are on vlan 10 and 11. What do I do? ASR1002x Edge router 4507 Edge ...
I have a cisco 7609 with sup engine 720, I want to implement VPLS for that I purchased a 7600-ES+20G3C with the adv license 76-ES+ADVIP-LIC in a separate pakCan you please help me how to activate the license on the 7609.
Hi all as per cisco config example : Load Sharing When Multihomed to Two ISPs Through Multiple Local Routers Load balancing is not possible in a multihomed environment with two ISPs. BGP selects only the single best path to a destination among the ...
I recently got a Cisco Switch 871W - I finally got it configured to my imac, but when I go into it to reset the admin password within the GUI it doesn't reset, and when I go into the terminal - I am not seeing it as it boots up. Does anyone have any ...
Hi, Just saw that udp/161 was open even though we have an ACL on snmp community -WHY IS THAT? SNMP is closed so that i cannot do a snmpwalk, but it's concerning that udp/161 is still open. snmp-server community ********************* RO SNMPACLsnmp-...
Hello all guys , cisco fellows Kindly , How can i subneting IPV6 thanks
Hi Guys, FYI last month I was activating licenses on Unity and ran in problems. When I was entering the PAK information the website was asking for Device UDI and Device serial number. I done a show license UDI and got the following information from ...
Hello all experts! No matter how I search on the internet about "VS-SUP2T-10G", there was no datasheet...! And then I found that VS-SUP2T-10G's Factory ID was VS-S2T-10G! But I don't know the difference between them. Could you explain the difference...
Hello friends, How does one decide on an image upgrade to a new iOS. Do people usually go for the newest releases or one with less bugs then another? When you guys are doing a software upgrade on a switch(whatever platform) what do you factor in...
With policy-map priority, do I need to define both priority 1 and 2? Or can I just define priority 1, and all other traffic will be 2? My example class-map match-any video_outbound match access-group 99!policy-map video_outbound class video_outboun...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
08-20-2024 04:56 PM | ||
08-07-2024 10:40 AM | ||
07-15-2024 05:07 AM | ||
07-13-2024 09:04 AM | ||
07-09-2024 05:41 AM |
User | Count |
---|---|
16 | |
13 | |
6 | |
4 | |
2 |