Switches - Small Business

How can I access the we interface of this switch if it is configured to get its IP address from the DHCP server? Since it is DHCP I do not know what IP address has been assigned to it therefore I do not know what ip address to enter in the browser.Th...

Hi,I am trying to download a new configuration file into the switch and it keeps saying:Bytes Transferred:  0Status:  Copy failedError Message:  Copy: Error in configuration download Line: 1 Command: no cdp runThe file that i am trying to submit i...

I set up router on a stick for Vlans 2-10, dhcp pools created on the router as well and everything worked perfectly on packet tracer. PCs obtained correct IP addresses and ping every host on all vlans. I also implemented IP nat overload and each Vlan...

Hello! Can you confirm than SG550XG-24F connect to RPS2300 using CAB-RPS2300= cable or CAB-RPS2300-E= ?   from documentation: Users may order either the CAB-RPS2300-E= compatible with Cisco Catalyst 3750E/3560E, 3750v2/3560v2, and 2960/2960S/2960P/29...

Hello,   I'm struggling to have the correct timeon my SG300 device. Manually time setting is for me not a good solution because each time the device has a power down the device lost the time. So I want to use a public SNTP server. I tried already a S...

Hi i am new in for this field i need some help   I have cisco catalyst 2960c 12pc L switch connected network its all ethernet port and ethernet uplink port used its one up link gb port connect ppx box trunking another uplink connect another unmanage...

Hi all,   I noticed that the SG500X switches come in Native Stacking mode. I'm finding some of these in various systems that other techs have configured left this way, even though they are the only switch in the system. So I am wondering if there are...

Hi,   I am looking for a bit troubleshooting a weird (to me at least) issue. I have a SG300-52P which is fairly new. It is used mostly with non-PoE devices but also has two phones plugged in that draw their power from the switch. Both have been worki...

SG300 in L3 mode - stops passing all traffic   Setup is:Modem -> Ubiquiti EdgeRouter POE -> SG300 L3 mode there is a single port trunk to port 1 on the SG300 that I have 4 vlans running across 2nd time in a month the SG300 completely stops passing tr...

Hello,   I recently purchased the SG200-50FP for use with six Linksys Business LAPAC2600 Pro Series AC2600 Dual-Band MU-MIMO Wireless Access Points. I have all APs running over POE from the switch.   The problem I am experiencing is that when I stres...