Switching

Dear CISCO Team, I am trying to configuring Ether-Channel between gigabit and fastethernet ports but channel couldn't formed. Can I create Ether-Channel between fastethernet and gigabitehrnet ports?  Kind Regards' Azib Naseem.

Since I updated a Cisco Catalyst 3750X-12S (no stack) from 15.0.2-SE8 to IOS 15.2.4E2 (c3750e-universalk9-tar.152-4.E2.tar) the Cisco Device Manager (WebGUI) is all distorted up (see attached screenshots).   I used both "archive download-sw" over tel...

Dear friends in the community, Please help. I've just added a card 2FE in the Cisco 2811.but when I "sh run" sh interface and sho ip interface brief. card is no I received an error message as follows on log: *Oct 23 05:12:12.515: %GT96K_FEWAN-1-UNK...

hello, Quick question - scenario: I have two EPGs in my ACI fabric, call them  EPG1 and EPG2. Those two EPGs connect to VLANs 10 and 20 respectively in a legacy N7/5/2k fabric via   EPG-based L2 outs  (so, EPG1 links to VLAN 10 in the legacy fabri...

I have  problem on my network the to the SVI interface the ping  is a  average or 500ms  the latency is only for the default-gateway from every vlan. on other pc on the same or diferent vlan the response is 1ms.

So I've been arguing with a coworker whether a router is needed to pass information in a network. According to the OSI model, in order for messages to move from one place to another, it requires network layer which a switch (not including a layer 3 s...

Dear Team, we have a cisco L2 2960 catalyst switch installed in a rack.this cisco switch is connected with a cisco nexus switch which is connected to our local LANthe 2960 switch is within 137 VLAN; although inter-VLAN routing is enabled through-out ...

I am trying to manipulate traffic according to byte size.   I can get the next hop to work, but it will not filter according to byte size. I've been working on this for two days and close to giving up. Here are the statements I wrote.  class-map m...

# switch current-stack-member-number renumber new-stack- member-number example configuration :# switch 2 renumber 1 Question : what is the current-stack-member-number : what is the new-stack- member-number #reload slot 2 -this is right i will reload ...

Hi there, Thanks for reading.  What kinds of things cause dropped packets? Here's what I'm seeing....  *: interface is up IHQ: pkts in input hold queue     IQD: pkts dropped from input queue OHQ: pkts in output hold queue    OQD: pkts dropped from ...

We have a 7606 on adventerprisek9-mz.154-3.s3 and its giving us trouble when moving IP's between SVI's. Currently we are using VLAN 200 for all downstream traffic. Due to temporary changes we now have everything downstream on layer two VLAN 200 going...

Hi All,This is my 1st post in this forum.We have different vlans for different processes in our organization & all the vlans are created on core switch (Cisco 3750G). When im pinging any VLAN's gateway in our LAN network im getting high latency. This...