Switching

 Hi All,I will try to explain this as best as I can. In our current TEST LAB we have a Pair of Cisco ASA5585x running in Active/Passive mode. We use a VRF transit to connect the 10 GB interface to a Pair of Cisco Nexus 6004 (L3) switches running vPC ...

Hi,we have a  cisco 3750  with 3 vlan configured. my ISP give   me only 6Mbps.how can i do to  shape  my output traffic to send  only 5.8 Mbps in my internet Pipe!! and give  priority by VLAN !!! class-map match-any vlan_10match vlan 10!class-map mat...

HII want  sync startup configuration switches!one switch located on master site and another is in backup site !switches are cisco 3750 and its work in layer 2 and connect with crossover cable!please tell me command to sync automatic switches startup ...

Dear, I found a few message debug DHCP, the vlan10 interface has configured the  ¨ip helper-address ¨ command to address 172.26.3.100 which reach through vlan 12 to site B .Taking into account that the DHCP server is on the Catalyst 4500, This comman...

Need that a Cisco Catalyst Express 500 behaves as  cheap switch. I happen to have a surplus of CE500 and i need to use one as a layer 2 cheap switch (unaware of lan and with port protection off). How can i achive this?

Please help me as early ass possibleHi i have Small business switch and i have cisco 3850 layer switch my small business switch connect to 3850 switch on fiber port and i am getting below log.I am getting log in both small business switch in each swi...

Hi I have a cat 6506 that I want to enable the IGMPv2 querier on an SVI, however I cannot get version 2 when I enter on an SVI:ip igmp snooping querier version ?I see only <3-3>and 2 is not available.Wondering what is wrong here, I need version 2.  

How do I configure DNS Failover?- I have domain hosted through Network Solutions             - Have noticed that I can configure 4 DNS Servers through Network Solutions- I use two ISP's :: Verizon and Comcast ..Need basic info from ground up..- Do I ...

Hi all, I have a doubt , can we connect a switch in PC/Data port & add 2 or more to PCs to it. One of my colleague tried it , It worked . I don't know how?  Below are my doubts , Is it making a loop or broadcast storm in near future?It should make a ...