Activity in Technology and Support
Resolved! Cisco ISE Re-Image
Hi i`m trying to Re-Image Cisco ISE ApplianceSNS-3615-K9 Ver3.3but this error keep shown to me i try to run the image vie KVM map and also Flash
move old cucm 10.5 to new physical hardware; any license issue?
We have one old cucm 10.5 M4 hardware. customer has purchase one new UCS server and one third party server with vmware 8.x.can we move this vm of cucm 10.5 to another esxi 8.x? will it cost any license issue? if we take a DRS back up of existing 10....
Power Consumption of WiFi 7 APs 9176I or 1976D while booting
Hi, What will be the Power Consumption of WiFi 7 APs 9176I or 1976D while booting? As some are saying its taking 60W while booting.
Secure Client and Posture module upgrade
As part of an ISE deployment, we use 802.1x (native Windows supplicant) and Posture. We currently have Windows 10 workstations with the AnyConnect4.10 + Posture Module client deployed using a distribution tool such as SCCM. (not via ISE) We need to p...
Resolved! Unable to logon to the FDM in the Firepower Threat Defence Sandbox
I reserved the session for this morning, and logged onto the vpn fine, but unable to use the admin credentials on the FDM.
Resolved! Nexus Dashboard upgrade
I have to do a new deployment of Cisco Nexus Dashboard.The nodes have installed the 2.3 release that does not support the direct upgrade to version 3.2Is it better to do an upgrade to 3.0.1 versions and then 3.2 or do a direct reimaging to version 3....
Resolved! ISE Temporal Agent posture
Hi Team, I have a customer who is deployment ISE using Posture Temporal agent.When they try to configure the Posture Policies with Conditions they cannot configure Anti-Virus conditions, but they can configure Anti-Malware.I was checking in Test ISE ...
C9200L-48P-4x DATA stack an not power
Hello,Could you please confirm the C9200L-48P-4, like other C9200 or C9200L can do only DATA stack (StackWise) with C9200L-STACK-KIT, and this not possible to have power stack ?Do you have any Cisco document that specifically mentions that ? I cannot...
Bulk provisioning the 98xx phone models with 3rd party call control
With the 98xx models being the go-forward Cisco phone model, and Asterisk support explicitly listed in their specification on the website I am wondering where any documentation might be for bulk provisioning these phones when in 3PCC mode - instead o...
Enable selection tool for moving and resizing images/text
I've used Sparkboard a little bit now and find it much better then our traditional smartboard that we had.However, I would really like to see an option to select text and drawings and be able to resize them or move them around the screen.
Resolved! Phone Image Push to 9851 phone - anyone got this working? Supported fe
Phone Image Push to 9851 phone (like legacy phones) - anyone got this working? Not supported feature or docu mistake? Docu Ref: https://help.webex.com/en-us/article/9geimz/Configure-9800-and-8875-phones-on-Unified-CM#task-template_8cd519e7-90d3-44f5-...
Resolved! CML Sandbox Down?
Hi- trying to create a sandbox, and have been for over an hour. I keep getting emails that my sandbox encountered an error while launching. I don't have multiple instances running, and I think out of 120 available instances only 77 are up. I tried co...
STP Issue – Added Planet Switch and Whole Network Went Down
Hi Everyone,I need some advice on a real issue I faced recently at work.In my company we mainly use Cisco Meraki devices in the access and distribution layer. Core layer is sometimes Meraki and sometimes other vendors.One day I connected a Planet man...
C2960Lでshow controllersのレジスタ見方
show controllersのレジスタの見方を教えてください。インターフェースのスピード/デュプレックスが対向ともにauto/autoに設定しているのに1000Mbpsにならず100Mbpsとなる原因を対向機、LANケーブル、自機のどこにあるのか特定するのが目的です。出力結果は以下の上段で下段は同じ機器構成の同じインターフェースで1000Mbpsでている比較対象事例です。各ビットが意味するところが分かるとよいのですが。機種：C2960L-UNIVERSALK9-M、Version 15.2(...
Resolved! Static MAC Address Configuration
Hi I try to configure the static MAC Address on the Cisco Nexus N9000, but it prompts the error message "Invalid MAC: multicast/broadcast not supported!". Is any expert know why prompt this error message CoreSW01(config)# mac address-table static 03b...
| User | Helpful Count |
|---|---|
| 131 | |
| 105 | |
| 96 | |
| 82 | |
| 73 |
