Activity in Technology and Support
WLC Software Upgrade Predownload Failed
I am looking to upgrade our wireless controller from version 17.9.6 to 17.9.7. I selected the option to do the AP Image Predownload, and the predownload failed on 13/45 of our APs. Does this mean that if I were to download and install or save and act...
Ceiling Microphone Pro how to access wizard when in Teams mode
Good afternoon everyone,We have recently deployed a Cisco Room Bar Pro with a Ceiling Microphone Pro. The Room Bar Pro is configured for Teams Room, but the WebEx Admin Center is indicating that the setup wizard for the Ceiling Microphone Pro has not...
Private vlan question
Ironically never implemented nor really went in depth with them, but say I have a dmz, amd I want to carry that network to my virtual cluster using one cable on multiple hosts.Is it just an isolated config? All I need is the vlan tag right? Also if i...
Resolved! Issue with FTD Provisioning on Nutanix V2 API - Password Not Working
Hey everyone,I'm running into an issue while provisioning Cisco FTD on Nutanix using the V2 API. When I deploy the VM without a Day 0 configuration file, the default password works fine. However, when I attempt to set a custom password using vm_custo...
Resolved! Provisioning Cisco FTD via API
Hello We previously used ASAv firewall provisioning/cloning for the Nutanix platform via the Nutanix REST API. Now, we are planning to provision and deploy Cisco Firepower Threat Defense (FTD) on Nutanix using an API-based approach, and later manage ...
cbs 220 Dynamic MAC address table full (32768 entries)
Hello i am using a cbs350 core switch and 2 cbs220 switches for other devices like workstations. The cbs 220's are producing a lot of Dynamic MAC address table full (32768 entries) messages while the mac address-table is nearly empty.CBS220-48T-R211#...
Inconsistent Interface Mapping Between FMC and Prism (FTDv on Nutanix)
Hello Everyone,We are automating network configuration (IP, NAT, ACLs, zones, etc.) for Cisco FTDv using the FMC REST API.The FTD VM is provisioned on Nutanix Prism, where multiple NICs are attached with known MAC addresses and portgroups.We log each...
ISE 3.3 Patch 7 experiences
Hi.We upgraded multiple ISE setups to 3.3 Patch 7 and now we are running into different weird issues. Some has 802.1x issues that doesn't make sense, some are COA issues, some are not authenticating users via TACACS+.How is your experience?
Disabling trunk interfaces
Hello!There is such a problem in the network. There is a C9500-40X core, it is responsible only for the user segment of the LAN (desktop PC, IP phones, printers, air conditioners, UPS, video cameras, etc.). Eleven floors are connected to it via MM fi...
Cisco Ceiling Microphone Pro cut-out dimension
I'm trying to find out what is the cut-out dimension for Cisco Ceiling Microphone Pro? I know there is template in the box but client want to cut the tiles for us before the installation
Multi site SDA transit and internet access
HiWe have 2 SDA fabrics. Site A and site B. Site A provides internet access for both sites at the moment. We want to introduce a second internet pipe and site B solely for that site. However, we want site A to provide fallback internet access sho...
ISE posture ACL
Hi I am configuring wired posture with web redirect and everything looks good even endpoints got the url acl but there is still access to cisco ise which i denied in url acl then i found also taking the default permit acl in the switch so when i deni...
Resolved! online image resource for Cisco Room Navigator touch panel pages?
I am trying to add some images to a custom user quickstart guide for a customer & have found that's it's near impossible to find the specific images that would match the end user's touch panel layouts online. I have found a few workable images that ...
ASDM 7.15 Visual Glitches
Anyone else having an issue where loading up ASDM causes it to glitch out visually? this happened after I docked my laptop and brought it up on dual monitors. I tried clearing Java cache as well as reinstalling the ASDM launcher.
Multiple IP address on single Access point
Hello team, I have some weird problem on few access points connected to L3 switch. This is situation: L3 switch is DHCP for few access points connected directly to it. ip dhcp pool VLAN75_WIFI_MGMTnetwork 10.2.75.0 255.255.255.0default-router 10.2.75...
| User | Helpful Count |
|---|---|
| 108 | |
| 90 | |
| 73 | |
| 62 | |
| 61 |
