Activity in Technology and Support
Support Request – Accessing ISE from Internet for Meraki Integration
Hello, I have deployed Cisco ISE on my private cloud using the VMware platform. The inbound management interface is configured with a private IP address on GigabitEthernet0. I have also configured a second interface, GigabitEthernet1, placed in my DM...
Cisco AMP for Endpoints versus Cisco Malware Analytics
Hello, everyone. I am studying security for my ENCOR exam and I have a question regarding the Cisco AMP4E (or secure endpoint) and Cisco Malware Analytics (or Threat Grid) appliances. My book defines Malware Analytics as following: "Cisco Secure Malw...
Cisco UCS BE6K-M6-K9 showing low CPU resource
Dear All, I am installing CIsco Collaboration version 15 applications on BE6K-M6-K9 server. I chose medium level OVA format for CUCM, Unity, IM&P. Now when I am installing Expressway , I am getting low resource error (CPU) on BE6K-M6-K9 VMware Esxi p...
ISE Sponsor Portal - Change Default Country Number and SMS Provider
Hello, I want to change default country code and sms provider in sponsor portal. Would someone please kindly explain what custom script is needed to achieve this. Thanks
Licences for 8200 router, DMVPN / IPSEC / HSRP
Hi AllI am about to replace an older router with and 8200 model, this will be used in one of my small sites.The features on the router required will beHSRP, DMVPN, EIGRP, OSPF, IPSEC.If I buy the DNA essentials licence it looks like that comes with p...
WLC 9800-L version 17.12.4 and Microsoft surface connectivity issue
Hi,I successfully migrated from Cisco Airwave OS to 9800-L IOS versoin 17.12.4, and everything is working fine with the exception of the Microsoft surface pro. All of my PCs (windows 10) and Apple Iphone devices are working great and they are using ...
Resolved! SFDataCorrelator down on Standby FMC
I have an HA pair of FMC's running v7.6.1.My Standby device is showing an alert "Process Status - the data correlator process exited x time(s)", additionally the Health Monitor is showing "SFDataCorrelator Down" and running pmtool status | egrep -i '...
route tag command on interface
Hi GuysI saw an ISP router interface the other day with a route tag applied to the interfaceipv4 address 192.168.1.1 255.255.255.0 route-tag 5 commandWould this have been a Cisco router? if so what IOS? I've never seen this command before on an inte...
mac-flap; limit or tuning?
Any know how many times w/in a time frame a mac address needs to show up on two ports before a mac-flap error is logged? And is there a way to tune that threshold?We're running some ap's in flex mode, and a few handheld clients are roaming between a...
Resolved! Implementing a 1+1+1 DNA-C DR setup
Hello, I was looking some help to clarify I'm taking the right approach of a current customer DNA-C DR solution. I've been asked by a customer to look at their setup. At the moment it seems none of the units are talking to each other so both units ar...
Resolved! IPv6 ping address problem for PC2s and printers on packet tracer.
Hello everyone,I'm currently taking a course on OpenClassrooms:https://openclassrooms.com/fr/courses/7192261-simulez-le-schema-de-votre-reseau-avec-cisco-packet-tracer/7444299-realisez-le-routage-inter-vlanI've followed the course right up to the st...
Virtual Network transfer to peer [HSRP]
Hello together,today I think I've a simple question but I'm not very sure if it is best practice so so I hope someone can help.In CC GUI I go to my BN, enable L3 Handoff and enter the local and peer IP.In field of peer IP, is it clever to enter an IP...
SSID "found on New Location" Message after Upgrade
Hi Team, after Software Upgrade to 17.15.3 at 9800-40 the Customer complains about a Message, that says that the "Network is found at a New Location". Does anyone know why this occurs, since nothing changed in Config or AP Location? And when will it ...
Resolved! SD Access Edge nodes and endhosts does not receive external routes
Hello!I have DNAC version 2.1.2.5 and SD access fabric based on two C9300-48U switches: one border&control plane node, another - edge node.I create one VN network USERS with one IP network and try to configure routing with server out of fabric but ha...
Resolved! Using C9200CX as Policy Extended Node in SDA Fabric
Dear Cisco Support Team,We are currently deploying a Software-Defined Access (SDA) fabric and have the following Edge Node models in use:Cisco Catalyst C9200-24T/PCisco Catalyst C9200-48T/PWe would like to clarify if the Cisco Catalyst C9200CX model ...
| User | Helpful Count |
|---|---|
| 92 | |
| 86 | |
| 74 | |
| 71 | |
| 69 |
