TelePresence and Video Infrastructure

Resolved! VCS Lync integration over TCP

Hello. I have followed this guide to enable integration between Lync and Cisco VCS:http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Microsoft_Lync_2010_Deployment_Guide_X6-1.pdf. I am trying to enable Lync to ...

Resolved! Tandberg 990 MXP TTC7-08. Factory default settings

Hi everybody !I have some problem with Tandberg 990 MXP TTC7-08, I’m trying to reset this device, but I don’t know how to do this with remote control.Can someone help me ?

IP dialling to a MCU (codian) registered to a gatekeeper (VCS)

So I have been racking my brain trying to figure out an issue that I am having.I am trying to figure out why I cannot dial to the IP address of my codian bridge when it is registered via H.323 to my VCS controller.I can dial to any endpoint registere...

VTAdvantage Windows 7 64Bit

Will there any solution out therecheers Florian

CTM 1.7.0 (CUCM 8.0) & Exchange 2007 SP1 CCR (2003>2007 Migration)

Hi TP PeopleDoes anyone have any experience of CTM 1.7.0 & Exchange 2007 SP1 CCR.We are currently running our TP mailboxes on Exchange 2003. There is a requirement to migrate from 2003 to 2007. For added confusion we hit some issues upgrading to 20...

Question on the Background for an EX90

I see where we can upload a custom .png file for the background on the EX90.Is there a way that this could actually be some kind of Flash or Video?Customer is going to have the EX90 in a Guest entrance and the receptionist will call the EX90 when the...

Mixing Aspect Ratios on Codian Bridges

I work for an organization with six Codian bridges and hundreds of Tandberg/Cisco conferencing units. These units range in age from several years old to brand new.Our organization does hundreds of video conferences per week, and one issue we've run i...

Prefering E.164 Alias over H.323 ID Caller ID on C series codec

HiWe have a setup with VCS and local registered C40 codecs. For ISDN connectivity we use a LifeSize Networker as a H.320 gateway. The Networker registers the gateway prefix with its H.323 ID on VCS and has a DDI range that is routed to the C40 codecs...

CTS endpoint upgrade from 1.7.4 to 1.8.1 under CUCM8.0

Dear all,We are tried to upgrade the CTS-500 endpoint from 1.7.4 to 1.8.6, however, it is failed.When we reboot the CTS-500 codec, it can't download the 1.8.6 as usual, is it related to CUCM software version?Thanks,Ben

Cisco (Codian) MCU Feature Request

Time and time again I have had customers ask me if they can customise or add splash screens to their MCU. Many of them have looked at the Polycom RMX and are really impressed with how customisable the splash screens and voice prompts are in the RMX.I...

Resolved! Call from CTS(FullHD) through Telepresence Server to HD endpoint

Hi,I have some doubts about the port allocated in a Telepresence Server when I call from CTS3000 to a HD endpoint using Telepresence Server.For example, I hace two CTS3000 and two HD endpoints, when I do a call, how many ports are used? Two Full HD a...

VCS and CUCM 8.0 Integration.

Hi,I have VCS Control ,VCS Expressway and CUCM 8.0 in the lab.Please let me know how to integrate CUCM 8.0 with VCS Control and Expressway.Any Document or supporting URL would be helpful.Thanks in advance.regards,Manish Gupta

TMS: MCU selection for Movi only conferences ?

Hello,For TMS managed systems the IP-Zone is used for selecting automatically a MCU.But this is not available for Movi users. As a result no specific MCU is used just a random MCU. Is it possible to add a TMS IP Zone to a Movi user or to a folder in ...

C20 Issue

Dear All,I have C20 Unit, there's no video out and onceI hvae to access the web interface I got the message: If I use the telnet to access the unit i got the message:please, advice me how to solve this problem.Thanks AllOmar Mahmoud