Hello,I am trying something kind of unique. I have a Tandberg 2500 and have it streaming to a multicast address. I have set up a live broadcast on the IPTV Content Manager, specifying the Tandberg as the IPTV server and the multicast address and po...
Hi; I'm trying to configure my E1 controller on 2621XM router with having IOS (c2600-ipvoice-mz.123-7.T10.bin), but it's not showing in the controller configuration mode!!please help how to enable it? and/or if there is some specific IOS release to ...
Hi All, I'd like to start my own business on VoIP and I want to start with little number of line like I want to handle 8 calls simultaneously, please advise me what should I do and which equipment is feasible for my topology?Warm RegardsAbbase...
Hi ,Has anyone configured 3party conference and MOH between two CCME routers using transcoding. I have a couple of 2800ISR routers and need to implement the same.Thanksrenzil
My IPVC-3540-MC03A module in my IPVC 3544 lost communication to my network. I consoled into it and all I am seeing is the below message over and over:"interrupt: panic: netJobAdd: ring buffer overflow!"It will not even allow me to use the help comma...
Hi,We have got two VSX7000 devices talking across a 6Mb link. I have setup QoS on all routers allowing 768Kbps and a burst of 72Kbps - we are trying to connect at 384Kbps.The connection is fine however there is quite a bit of packet loss - about 1%-7...
Hi, this is Germano Graziani from Italy (ROME).Our team is working on a VoIP service delivery for the most important wireline Customer in Italy.I've simulated, in our lab, the REFER - ACCEPTED - NOTIFY scenario as in RFC 3515 using CISCO IP PHONE 796...
1. Cisco 2821 with VIC2-4FXO connect to NEC PBX via Ext.When the call as below is okThe calls were make from the voip leg toward the pots leg(PBX). PBX --------- 2821 ------------voip <---------- call direction But as below isn't w...
We are on IPTV 3.4.14 our VOD servers have a bandwidth limit of 10000 kbps. During high use times they will max out. How can I increase the limit from 10000 kbps?
