TelePresence and Video Infrastructure

I am would like to setup a video portal between cloud registered DX80's at 2 locations that would auto connect point to point or connect to webex teams meeting on a schedule (8am-5pm).  This would allow users from either location to be able to walk u...

We have installed recently Cisco SX20 in the boardroom after a month we realized to have webex teams for calling with office employees. so we subscribed Cisco Spark and we enabled SIP calls but then the earlier IP based H323 calls are not working now...

Hi,   One of our project, we use touch 10 device with cisco SX20. But, after we shut down all devices, Touch 10 can't automatically reconnect to Cisco SX20. How can we solve to reconnect itself ?

Hello, We have problem with pairing a touch 10 to a Cisco SX80 codec. The error message on the touch 10 is: "the target system does not support this touch panel" see attached photo.

Hello,  I was wondering if any one could tell me the pin out of the speaker output of the Spark codec. Is it mTRS balanced by any chance?  Any information would be greatly appreciated! 

I am seeing captive portal detected message in diagnostics page of SX 20 codec, please suggest me how to resolve this.   Have researched about Captive portal and it seems public access is granted for this. Need to know how to disable this.   WARNING:...

we implemented three cisco spark roomkit plus and one cisco spark roomkit. when we  tried for failover test it failed. for example, if all spark roomkit registered to cucm publisher we will stop the cucm publisher service. then roomkit devices that a...

Hello Experts ,    i have a generic query , we have an head office where we using cisco C40 to join Video conference using bluejeans . with 8 participants .    within same campus network we have 1) C40 and 2) three other rooms with PC.  ie 3 particip...

Hi,    We have TMS 15.6.1 and CMS 2.2.10 and all codecs SX20 . We had a strange behaviour when scheduled a call with PIN in automatic connect mode. (note. the way we do is to add the CMS and only the host SX20 in automatic connect using the TMS, othe...

Dear Team, Please share installation guide  & start manual Step by step. CS-KIT-K9 CON-ECDN-CSKITK9   Regards, Sachin

Hello Cisco World,   I will have the honnor to use a Cisco IX5000 telepresence system in the next weeks and I would to ask if it's possible to use the three monitors to connect 3 differents sources to display a complex presentation ? I would to displ...

MCU 4515 running version 4.4(3.67) After a soft reboot the system cannot connect to endpoints or receive calls. Any ideas? have tried several reboots, cold reboot, waiting 12+ hours and no change. Ip address below hidden.   31209:06:06.784 H.323InfoN...

Many of our customers are using the "Smart Scheduler" from the Cisco Telepresence Management Suite (15.7.0) with the Provisioning Extension (1.13.0) together with Cisco Meeting Server CMS (2.3.6). The old fashioned TMS Front End is not available for ...