Hi,
I have DX80 running 10.2(5) ES. When i run webex on DX80, i get this message "To continue using Cisco webex meetings, you are required to update it to a newer version. Do you want to go to google play to update it now?"
In google play store, ...
I see in 8.1 VCS documentation its possible to authenticate devices via certificates configured in Zones,
Can we restrict MRA registrations in Expressway by user certificate? We are deploying endpoint certificates to BYOD. devices. No SSO. Running la...
Is it possible to connect any third party camera to Cisco SX80. I am looking for connecting speaker tracking vaddio Auto Trak 2.0 camera to the Cisco SX80 instead of the Precision60 or speaker track cameras.
Hi Cisco guys,
I am looking to update our Dev environment as we are updating our prod environment in the coming months:
Old Environment looks like this:
1xVCS
1x Telepresence Conductor
1x Acano Bridge
1x TMS
So a couple of these are EOL and ...
Minor annoyance but would love to find a solution.
We frequently access our older MXP codecs (latest FW on them) via the web gui, by putting in the IP address into internet explorer 11. The web UI does not refresh properly or respond well in other...
So into a call for a few minutes and the system crashes and goes into maintenance mode. A few minutes later, its back up and ready to dial back in to the call. Also happens just in a local presentation. Is this common and/or is there a fix? Thnx
Hi all,
i want to query SQL server, to retrieve information about registered devices in CallManager and VCS-C. From Cisco TMS i found views displaying registered device to CUCM and VCS. What i'm looking for are tables and columns to build a query aga...
Hi,
the below command does not work in the 4000 ISR ?
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback cisco
Do I need this ?
What is the equivalent command for this
Thanks
We have SX20/80's deployed with Touch 10 and are in the same VLAN. Recently I started seeing some of the touch panels losing network configuration (static IP. subnet mask and default gateway) information and losing contact with Codec. I have seen thr...
So can a couple of old Tandberg TTC8-01 be used for anything? They have HDMI outputs on it and power supplies are not a problem.
Just seems like such a colossal waste to toss/excess them given the optics are probably just as good as the newer CISC...
all,
has anyone already experienced a loss of network configuration on Touchpanel 10 connected to SX20N running running ce 8.2.2 after panel is disconnected from network / power?Any experiences made so far?
regards
andy
Hi;
I created a new zone in my old VCS version 7.2.2 A524 ***** to interconnect it with a new VCS version 8.10.x for H323 it's ok but for sip tls I have this message that s displays "TLS negotiation failure".
I check the server certificate it has exp...
