Resolved! Jabber Guest
Hi, Is it true that we cannot implement in a single cluster (Expressway-E) B2B and jabber guest at the same time ? Thanks
Hi, Is it true that we cannot implement in a single cluster (Expressway-E) B2B and jabber guest at the same time ? Thanks
Got a new Edge 95 and connected per User Manual. However, i always get "No Signal" error. I suspect it to be a resolution issue since i had to make tweaks for another hardware (an android box) to make it work. The question i have is, How to change th...
I am trying to add (2) scheduling mailbox in Cisco TMSXE and keep on getting an error below. My exchange engineer followed the Cisco-TMSXE-Deployment-Guide-5.5 "Creating and Configuring the Mailbox" to the tee (Starts on Page 56). For testing purpose...
the guide for the tms (page 60, section: Regular Time Zone) shows some code snippets which Im having an issue replicating. Basically whenever I set the timezone rules retrieved via getTimeZoneRulesById to a conference and try to save it i get the e...
Hi all, does anyone tried to gather vTS's Event Log via API before? regards
Hello all, Does anyone know if it is possible to make a call to a cloud-based Room Connector from a C20 without the endpoint being registered to VCS?
Would have preferred Cisco left well enough alone with the clear plexiglass ceiling mics. The new ceiling mics now have a white color and it's now going to cast a shadow on my customer table. For me, lighting and shadows is more of an issue than blen...
How Can I run a report from the TMS to find which endpoints are paired with Touch 8 and 10 panels ? regards
I'm having trouble understanding the VCS Cluster's FQDN and associated SRV records for incoming calls and registrations.According to the VCS Cluster Deployment Guide:Example: DNS SRV records for 2 peers of a VCS Expressway cluster for company.comWher...
Greetings All, This is a strange one - I have a new Cisco Room Kit Plus running ce 9.1.3 75ff735 2017-07-10 code registered to a CUCM running 10.5.2.12901-1. Intermittently, I am getting the message on the display in the attached picture. It is usu...
Hi guys, I would like to know if i can integrate CMS with CUCM 8.6. I just finished basic config of my CMS and i want to route calls between them. Following the docs, the CMS must be configured as a conference bridge , CMS in latest CUCM releases a...
Hello everyone, I am setting up an Expressway-E, after loading the Advanced Networking option key and restarting the device, it is still only showing LAN1 in both IP configuration and in the ethernet settings. Any ideas?
Hi, I have a TMS sw 13.2.1 and a TPS sw 2.2(1.54). TPS has 4 screen licenses, while TMS has 9 total System Licenses and option key for TANDBERG Booking API Integration Package (25 registered systems in TMS). I think I could be able to schedule meetin...
I have 2 Cisco Meeting Server 2.3 1 is for Callbridge, webbridge 1 is for recording and streaming. I enabled on CallBridge Server Configuration -> Call Settings -> SIP call participant labels - Enabled. Labels are ok on the Videoconferen...
Hi guys, how can I manager new addresses (add or remove) when the video endpoint is register in spark?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
06-27-2024 06:47 AM | ||
06-10-2024 11:20 AM | ||
06-10-2024 11:14 AM | ||
06-10-2024 09:51 AM | ||
06-04-2024 12:47 AM |