TelePresence and Video Infrastructure

Dear Team,I have only SX20 (without any other VC equipment like Gateway,MCU,VCS & ISDN LINK etc) Now i m facing the issue that when i Switch ON SX20 then Unregistered IP Address shows to us on LCD display upper left side corner but we are able to mak...

Hi, we had an upgrade from X.7.2.2 to X.8.1 and run into the problem with one way Video or established call without video or no incoming video, if the SIP Client is registered on the VCS-E Cluster.If the client is regisred on the VCS-C Cluster , than...

 Hello all,One of my customer is looking for Miss Call notification into Mail.Customer has CUCM 9.1, CUC 9.1, IM&P 9 & Outlook 2010.Is there any possibility for this ?Regards,

Hi,I have installed Jabber Video for Telepresence 4.3 but while launching it throws error "New Feature in this version of Movi are not supported by your computer's graphics driver" Can anyone help me out here? Thanks,Vikash 

We have to install 3 cameras on C-60 codec........the arrangemnt is as followsFirst camera --- on HDMI portSecond camera ---- on HDMI portThird Camera  ------- on DVI port via DVI-HDMI convertorOn going to the camera settings option...........we are ...

Guys,We have a couple of T3s that we need to migrate to a different system. I have the T3 admin guide and I can see that you can change the gatekeeper address from the system menu. That I think is only for the center codec. What process do I need to ...

It is possible to make a call from a SX20 CUCM registered to an HDX8000 Polycom that is directly connected to Internet?

Is there a way to disable the Call History on the Touch 8 (attached to a c-series or ex-series unit)?What about the Call History in Jabber Video for Telepresence?I've a client that would like to do this, in order to discourage return calls in certain...

We have implementation of VCS control with VCS expressway within an internal leg of the Fortigate firewall with no dual NIC. We have NAT-ed virtual public IP for both inside the firewall. both VCS are in the same subnet (private IP and NAT-ed virtual...