What does the TTC5-06 look like inside? Is there a circuit and if there is, how is it designed? I'm building an adaptor to connect my mic to a PC, but I need to know how it's built. Does anyone have any pictures or a schematic?
Hey,i have a FAX with Voice Gateway VG202 , it works with this config on the CME :dial-peer voice 21 voip destination-pattern 12 no modem passthrough session target ipv4:192.168.166.4 fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallbac...
HiWe always seem to have problems calling VCS to VCS systems with endpoints via the internet. We're running 7.2 on our VCS and the remote company is running 7.1 on their VCS. Calls connect ok however there are random drops during the session 3 over a...
Hello everybody!Customer came to us with a TV set problem. One of three TVs couldn’t show the video but LED indication was ok. First, I asked them to check if codec connected to broken TV works properly. We checked that all codecs worked normally. Th...
Hello,I installed an SX20 connected on the internet link an its working, now we wanna put the SX20 inside the voice network and register with CUCM to make video conference call with the IP Phones 9951 and with internet contacts.What are the logical p...
Good Morning Team ,If i want To use a Ex90 or E20 as a provisioning device, which parameter are needed to configure the XML templates? I configured basically the VCS-C , VCS -E address and the phonebook source. But it doesn't work or could not regist...
Hi, ExpertsCalling from xxx@jabber.com to the MCU, the dual stream works, and calling from xxx@mydomain.com to the MCU, audio/video are all worked fine, but the dual stream not working, any specific reason for this?
We have SX20 with Multi Site Video Conferencing & Ex-60 Video End PointsIs it possbile to let someone from outside with just a laptop to join the conference ??Is it possible to purchase hosted WebEx for example and integrate with the SX20 ( send WebE...
Hi thereOn a project we would like to use a 3000MXP integrator codec.But we found out that this unit is no longer on the price list for sale any more.So the next thing would be a C40 codec. With of course is a much better codec.But.. I could not find...
Hi,I am in the process of installing CallManager 8.6 business edition and the customer has requested that we intergated with a Radvision video conferencing solution.Is the above possible and what would be required i.e. Licensing on the Business Editi...
I have several new codecs, C20 mostly, all with the InTouch controller. When you go to the Directories tab on the InTouch, often times nothing appears. Sometimes if you start to search for something it will find it but the list is blank if you don'...
