TelePresence and Video Infrastructure

HI everyone,i have a VCS expressway (X6.1) and VCS control (X6.1), i have followed a cisco document to configure those devices. I am trying to get access through jabber video 4.4 but i always getting login failed, wrong user or password Nov 17 23:29:...

Hi All,A simple query. With Cisco ios NBAR, when we say 'match protocol rtp video' , do we also match the audio embedded in the video stream ? .. or does that audio get matched only with the 'match protocol rtp audio' statement ?Also, is the 'match p...

Hi guys, I ran into a problem on a voice network managed by 3 Cucms with 60 Cisco phones and more than 400 telematrix sip phones. I observed exhaustion in which sip phones fail to register with d cucm after about 428 of d sip phones are already regis...

How can I disable the caller ID on my SPA112 so it answers the call when I hit talk instead of hitting talk and then having to press 1

I have a customer that insists on requiring "two factor" authentication to allow devices to register to their VCS Expressway.The devices do register now using the credentials (manual accounts, not AD) created in TMS. They want to be able to add a sec...

Earlier this week, our Tandberg C20 asked whether to update the camera software.  We keyed in yes, but the update hung.  We power-cycled, and ever since, the camera image is not displayed locally or transmited.  We can place calls to or from the C20,...

with Mahesh Anjan Welcome to the Cisco Support Community Ask the Expert conversation. Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about troubleshooting video call flows that tr...

Dear All,I need help with transfering my CUCM PUB from a our branch office to our main site, current situation that both PUB and SUB are in the same branch, and i need to knowwhat is the steps i have to make ?what is the impact of PUB - SUB discommun...

Hi All,I have a small issue to setup my VC properly.Basically the design of my solution as follow:      LAN ---------> VCS (StarterPack)      |_______> Internet Gateway (2911) (ADSL with Fixed Public IP)  --------------  Internet  -------->  MOVI (ja...

We have installed Cisco Sx20 Telepresence and using Cisco Jabber Client 4.5 (Windows)On the Jabber Client (Windows) we get video and audio from SX20, but SX20 is not getting video and audio from the Cisco Jabber Client.Could someone help ?When I esta...