TelePresence and Video Infrastructure

Hi all!!I recently configure my MCU 4501 in order to manage the VC service on our central offices. I see my endpoints registered, but, in the moment that the MCU calls to the endpoint, appear the following message:28311:34:06.011 CONFERENCEWarninguna...

we have c 20  . Camera Orange Light Continous ON but Camera not show self View .   we plug directly with LCD but same status . Yasir Vistro .

Hi,I've to register/setup neighbor ISDN VCS control.would I have to register ISDN gateway on VCS control or will I have to get it up as neighbor on VCS control?I also have to setup rules so that if call to IP fails than that call should be diverted t...

One of my customers is concerned with Security for his VCS Expressway and would like to know if there is a document available from Cisco that I could forward him to address some of his concerns. Is there such a document out there?

Can someone please suggest why this could be happenning? TMS is complaining of a critical error whereby it cannot import phonebook data from TMS. I can confirm that the password is correct, the provisiong tab on the VCS shows 4 green ticks, the TMS a...

When Active Directory settings are specified, inside Network Settings page in Administrative Tools menu, there is no field to specify IP address. How TMS knows what AD it should contact?

Is it possible to put a limit the amount of time (minutes of call time) a particular Jabber/Movi user can use on a monthly basis?  Is there a particular configuration in TMS that will do this?

With Andreas WintervoldWelcome to the Cisco Support Community Ask the Expert conversation with Cisco  expert Andreas Wintervold. This is an opportunity to learn and ask questions  about design, best practices and troubleshooting tips for Video Commun...

Hi GuysI have just spend a couple of days trying to install TMSPE into our lab. But i kept getting an error during the install " TMSPE Setup Wizard ended Prematurely. After going though the log i found the error message "Installation success or error...

Once a downspeeding has occured on an IP call because of bad network quality, will it upspeed back to its original bandwidth if the network quality stabilizes?