Hi, Every time I want to have access to the Cisco Unified CM Console (System version: 7.0.1.11000-2), I use the https://10.10.x.x/ccmadmin/showHome.do homepage on my client computer, but when I open the page, I get a SSL certificate error, stating no...
Hi all,I'm integrating Unity 7 with AD 2008 and Exchange 2007.But when i check message with the phone there's no voice mail message therebut when i check message with webmail exchange there's a voice mail there and i can hear the message.Please advic...
Hi All, I have two CUCM 6.1.3 ( I Pub & 1 Sub). All phones registers with sub and all phones use pub for tftp. I am trying to force some phones to register with pub but have no success even new CM group created has pub as first choice & sub as second...
Hi there, I am having an issue tracking down the COP files for CUCM 6.1(3) to enable Cisco Services Framework device type. Can someone point me in the right direction.Thanks in advance!Brendan
Hi Experts, We have one Publisher and one subscriber -Our phones are registered with Subscriber. CM Group has subscriber as the first CM and publisher as the second. During failover (I unplugged the subscriber) found that half the phones couldn't fai...
We are using CUCM 6.1. We have mostly 7961's and some 7941's, all using SCCP. I have the NTP References pointing to our PDC emulator and a backup. The PDC syncs to an external source. I have the date/time group configured to use both NTP Refernces...
So - From what I understand before I came on board our marketing guy made wave files for our on hold music. These are in a 512k bitrate format and they sound pretty clear for on hold music. I want to get rid of these and go back to the "canned" cis...
Hi, We have a centralised CUCM cluster and need to install Unity Connection on a remote site. The design guides show this is supported but I can't find any minimum bandwidth requirements for the WAN between CUCM and UCN other than the standard min 1...
I keep getting this message when trying to loada new music file. "Not enough disk space to transcode the audio file"I have tried rebooting the server and removing the existing files and adding themback, but it will only allow me to add a few before g...
Hi All,I m getting the following error, whenever i try to add a new subscriber using Unity SA web page :"An Unrecognised error 0x80042024 has occured, the administrative limit for this request was exceeded.\x0D\xA. The new subscriber was not successf...
I have CUE 3.0 installed. When callers reach my auto attendant, they cannot dial 2 to leave a message. The error says, "Sorry, there is no mail box associated with that extension." When I create a voice mail box for the extension, calls go straight t...
