Unified Communications Infrastructure

Can anyone help me with Route Patterns and Direct Routing Rules? I have to create a few duplicate extensions on my Cisco UCM 10.5, they are in different partitions etc. One partition is part of a call handler in unity, when I create a duplicate exten...

Dear all, I have configured a sip trunk between an existing cme and a new cucm I have configured a pattern for the HQ numbers 1XX and 2XX and I can see it is working and the leave the branch office to CME at the HQ. debug CCSIP on The CME show that t...

We just did a new installation and the CM Services doesn't show as activated or deactivated.  It is blank. I can't start it manually too. Does anyone know why?  This is a new install. thanks,

I am running Prime License Manager Enhanced 11.0.1. I have what was a valid 340 count license file when it was installed on June 2 2016. The license manager says I am now running in DEMO mode which will expire in 34 days. How do I resolve this confli...

I'm removing an existing CUACA 10.5.2 from an existing CUCM 10.5 cluster and re-integrating with a new CUCM 10.5 cluster. I don't see this defined/overlooking in the 10.5 Admin/Install guide...is this supported? http://www.cisco.com/c/dam/en/us/td/...

Hi guys, I have some issue with the meet me number and conference setup in CUCM 8.5.1.12900-7. My setup is like this: I'm creating the conference with meet me number 32X, and it's working... after this i'm trying to connect to the conference by dia...

Hi I have to integrate the 2 Artist VoIP-108  cards with CUCM. Theses cards uses 2 IPs and 8 ports each. I follow this guide which explain the integration with Axteris to try to figure out how it has to be integrated with CUCM. https://www.riedel....

I am having issue with a CUCM 11.6 after upgrade the boot fails with following issues, I have attached a screen shot. I had the PUB and SUB's up but now all have same issues three different BE7k's . ANy help would be appreciated FATAL:Could not load ...

We recently upgraded from 10.5 to 11.0 to implement the Emergency Call Handler features. I have worked with the local PSAP to verify that they are receiving the correct ANI/ALI. However, PSAP callback fails with a fast busy. I've read through this PD...

We experienced that RTMT displays a window titled "Error" with the following message (see attachment): RTMT failed to initialize. Exiting... Log file ~/.jrtmt/log/rtmt.log ends with the following messages: 2016-XX-XX XX:17:03,453 [SplashThread] IN...

Hi Guys, since i had great luck posting here for my first question, i figure the second should be easy for you. We use CUCM 10,5.x jabber 11.5.x and up, IIS server on windows 2012r2 I have set up IIS server to host Jabber Pictures of users and its w...