I think that a UCS Upgrade from to 2.0.4b to 2.2.1b is possible in one step, eg. upgrading first UCSM, and then go with autoinstall for infrastructure and servers ?http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/upgrading/from1.4/to2.2/b_Upg...
Hi I have upgrade fi to 2.2(1b) and the cna adapter to the newest version,The 1225 adapter is in pci 2 slot.then i connect 240 rack server to fi ,and the fi port is server port.but i can not discovry 240 , and i don't konw why any idea ? thanks
Hi all,I have 2 Cisco FI 6120, with 6 port 8GB FC expantion module. I also have 2 EMC VNX 5500 storage, my question is:can I connect the ports on the FI's expantion module directly to VNX 5500 storage (there is 2 * 4 ports 8GB FC modules connected to...
Hi,I have a server C220 with card raid UCS-RAID-9266CV in PCIe slot.I do need to remove this card in order to use the PCIe slot for a additional NIC.Can i use the Embedded MegaRAID Controller to configure RAID 1 on SAS integrated disk ?it seems to me...
To my understanding - Call home - I configure the SMTP server and I do few other configuration, which can enable be to send emails to desired recepients for any severity.Smart call home - Striving to achieve auto TAC case registry for a severity. Is ...
Hello Community.We have some trouble with our UCS C210M2 Server. The fans allways run at full speed. And I can't boot it up, because the server hangs at the "Configuring and testing memory, please wait..." message (see attached screenshot).Sometime t...
Hi,I'm in the initial set up of 2 Fabric Interconnects 6248UP and 2 Chassis 5108 with B200-M3 servers. I'm getting the same error on all the servers in the discovery process, particularly in the "Discover Nic Presence Peer" process.¿Can anyone tell m...
I understand the following to be true with Cisco UCS platform:'you cannot create VLANs with IDs from 3968 to 4047. This range of VLAN IDs is reserved.'I have a private 172.16.x.x network northbound on my network that is in vlan ID is 4001, I wanted t...
I see in the interoperability matrix for 2.0 (3c) fi fw that windows server 2012 is not a supported operating system. Will it still work with a certain driver package?Is there a minimum version of FI firmware in order to run windows server 2012 on B2...
1) The IP assigned to the CIMC chip the one that the remote KVM uses correct?2) The IPMI IP address is assigned to what part of a B-series blade?Thanks
The following Cisco UCS Platform Emulators are available for download from Cisco UCS Communities:Latest Cisco UCS Platform EmulatorCisco UCS Platform Emulator version 2.2(1bPE1):Details on this ReleaseDownloads:Download UCSPE 2.2(1bPE1) OVA or ZIP (R...
Has anyone done Cisco UCS Blades equipped with a Fusion IO card, in a ESXi VDI environment ? e.g. can one just install the proper driver for ESXi, and then access Fusion IO card as a disk ?Is it correct, that this doesn't require a Raid controller...
Using UCSM 2.1(1f). Purchased three B200 M3 blades with Ivy Bridge CPU not supported until UCSM 2.1(3a). We're told we cannot upgrade the firmware for those blades only and the Compatibility Catalog, but must do a complete UCS upgrade to 2.1(3a). ...
