Voice Systems and Accessories - Small Business

I am working with a UC320 test system in my office prior to an upcoming customer installation, and have found unusual problems with the data wireless network. I will be deploying the system in an office with a number of wirelessly connected PC's, Mac...

Hello,I have been experiencing a strange issue.  When programming a button on the 500s sidecar using "button 3:81XXXXXXXXXX" from the CLI, my UC540 crashed.  with 8 to find an outside line + 1 and the number.  This was verified twice.  The third time...

Hi,I cannot access the admin config on the sps525g2 phone.  When I browse to  <phone ip adress> /admin, all I get is a 403 forbidden.How do unlock/access the admin config section on this phone?Thanks

Hello,I'm trying to configure SLA feature for a CISCO SPA525G phone to work using the RFC4235.In the "Att Console" tab, I have set the "Server Type" to "RFC3265_4235".Upon registration, the phone is sending a SUBSCRIBE, but the SUBSCRIBE message is n...

H need to run this in SCCP for connection to CUCME,I need the phone load files for this, esp, XMLDefault525G.cnf.xmlcan anyone help ?regards, Will

Does anyone know what fax support is available wih the UC320W?  In particualr I am referring to distintive ring.What I have is a service with Bell Canada where the single business FXO phone line has two numbers associated with it.  One number for the...

Hi Team,Does anyone have a list of common features and applications on the UC500 platform that require Octo-Line phones to work properly?Ideally, we're looking for a grid that will have something to this effect:Feature/ApplicationLimitation with SPA5...

I have a UC 540 running 8.1 and the users were requesting voicemail to email notification for a General Delivery Mailbox.  The users are a part of the Blast Group which has the GVM, but inside of voicemail notification in UC and CUE, there is no opti...

I have a UC520 running an Auto attendant.DDI is provided by skype.When you call in on the DDI the AA plays the message, if you select option 1 it will ring an extension. All this works fine.If the extension ring no answers to voicemail you hear silen...

We have the following configuration for shared lines as overlays on UC520.  I tried to change the overlayed lines to octo-lines for barge support but this is not configurable.  I'm not sure if this would even be a good idea but was going to see the o...

Hi,  Ive setup a syslog server and pointed all my devices to it.  The SPA9000 & SPA400 & 4x SPA502's.  But how can i identify what device is logging what?  They all have the same hostname, My syslog server is not on the same LAN its running accross t...

Question: When one transfers a call by first hitting the transfer softkey, then pushing a button which is a monitor button, the result is a blind transfer.  When I do the same thing with a speeddial button, the result is a consultative transfer.  Can...

HelloDoes anyone know the process to reactivate the Unified Callconnector client when hardware changes ?My customer have many UCC PAK, one per laptop, and a Callconnector Server v1.6 with a UC560.For security reason, he used to reinstall the OS every...

Hi Joel,I posted the answer here from a product engineer, because it is very relevant to other folks who probably have the same question.There should be no problem  ringing a phone(<=1 REN) with 1200 feet 24AWG wire.UC320W has higher ringing voltage(...

Is anyone have any idea why call forwad all is not working? call comes in and says it has been fwded and than hang no other action.pl. help.As well after removing cfwdall still AA answering this extension has been fwded and it ring on right extension...